How to deploy Outlook Shared add-in

  • Thread starter Thread starter Gokul
  • Start date Start date
Status
Not open for further replies.
G

Gokul

Hi,

I created shared add-in for Outlook using visual studio 2005 and language is

vb.net. The setup file is working fine in my machine but it is not working in

another machine. When I check trust center add-in is in disable items. I am

not able to enable.

I am totally new to this. I am not able to find solution. I need setps to

create deployment setup file. Can any one help me on this.

I have asked this questions in two of similar forums but I did not find any

proper solutions. Please help me to solve this problem.

Thanks & Regards

Gokul
 
What version of Outlook was used on the development machine?

What versions are you deploying to and supporting?

Are you shimming your addin? Are you strong naming your addin? Do you have a

manifest file? What sort of installer are you using? Are you deploying all

dependencies and requirements? Is the Framework of the correct version

installed where it's failing? Are the PIA's installed?

You need to answer all these questions and provide all the relevant

information if you want help.

First thing I'd recommend is to review the troubleshooting information for

managed code addins at

http://blogs.msdn.com/vsod/archive/2008/04/22/Troubleshooting-com-add-in-load-failures.aspx.

I've found it very useful for troubleshooting load problems, especially the

Fusion logging.

"Gokul" <Gokul> wrote in message

news:E3B5B890-EFE5-4342-AECA-36609A5E0BA0@microsoft.com...
> Hi,

> I created shared add-in for Outlook using visual studio 2005 and language
> is
> vb.net. The setup file is working fine in my machine but it is not working
> in
> another machine. When I check trust center add-in is in disable items. I
> am
> not able to enable.

> I am totally new to this. I am not able to find solution. I need setps to
> create deployment setup file. Can any one help me on this.

> I have asked this questions in two of similar forums but I did not find
> any
> proper solutions. Please help me to solve this problem.

> Thanks & Regards
> Gokul
 
Dear Ken,

Thanks for your reply.

What version of Outlook was used on the development machine?

Outlook 2007

What versions are you deploying to and supporting?

Outlook 2003 and 2007

Are you shimming your addin? Are you strong naming your addin? Do you have a

manifest file? What sort of installer are you using? Are you deploying all

dependencies and requirements? Is the Framework of the correct version

installed where it's failing? Are the PIA's installed?

I am totally new to this. I have read about the above, and I am not clear

with that. It is possible give me tutorial links it would help me.

Also whether any books available to read about developing and deploying for

shared add-in.

Thanks

Gokul
wrote:


> What version of Outlook was used on the development machine?

> What versions are you deploying to and supporting?

> Are you shimming your addin? Are you strong naming your addin? Do you have a
> manifest file? What sort of installer are you using? Are you deploying all
> dependencies and requirements? Is the Framework of the correct version
> installed where it's failing? Are the PIA's installed?

> You need to answer all these questions and provide all the relevant
> information if you want help.

> First thing I'd recommend is to review the troubleshooting information for
> managed code addins at
> http://blogs.msdn.com/vsod/archive/2008/04/22/Troubleshooting-com-add-in-load-failures.aspx.
> I've found it very useful for troubleshooting load problems, especially the
> Fusion logging.

> >

>

> "Gokul" <Gokul> wrote in message
> news:E3B5B890-EFE5-4342-AECA-36609A5E0BA0@microsoft.com...
> > Hi,
> > I created shared add-in for Outlook using visual studio 2005 and language
> > is
> > vb.net. The setup file is working fine in my machine but it is not working
> > in
> > another machine. When I check trust center add-in is in disable items. I
> > am
> > not able to enable.
> > I am totally new to this. I am not able to find solution. I need setps to
> > create deployment setup file. Can any one help me on this.
> > I have asked this questions in two of similar forums but I did not find
> > any
> > proper solutions. Please help me to solve this problem.
> > Thanks & Regards
> > Gokul

> .
>
 
OK, first basic thing is that you develop on a machine that has the oldest

version of Outlook installed on it that you intend to support. So you'd need

a machine with Outlook 2003 installed on it to support Outlook 2003 and 2007

(and soon 2010).

The other questions I asked are so basic that you really need to start at

the beginning. I don't know of any specific books on shared addins but you

can get some basics on that either from my book or Randy Byrne's book on

Outlook 2007 programming. You can also read some of the development articles

at MSDN. I'll list some that are useful.

Shimming, Shim Wizard: http://msdn.microsoft.com/en-us/library/bb508939.aspx

Deploying PIA's in a setup project:

http://blog.developers.ie/CGreen/archive/2006/10/27/2427.aspx

Deployment (specific for VSTO but useful anyway):

http://msdn.microsoft.com/en-us/library/aa537173(office.11).aspx

I'd also go to www.outlookcode.com and review all the information there on

COM addins, there are lots of articles and references there.

"Gokul" <Gokul> wrote in message

news:32F87DAE-7308-4025-9123-6D5FAE12F7F6@microsoft.com...
> Dear Ken,

> Thanks for your reply.

> What version of Outlook was used on the development machine?
> Outlook 2007

> What versions are you deploying to and supporting?
> Outlook 2003 and 2007

> Are you shimming your addin? Are you strong naming your addin? Do you have
> a
> manifest file? What sort of installer are you using? Are you deploying all
> dependencies and requirements? Is the Framework of the correct version
> installed where it's failing? Are the PIA's installed?
> I am totally new to this. I have read about the above, and I am not clear
> with that. It is possible give me tutorial links it would help me.

> Also whether any books available to read about developing and deploying
> for
> shared add-in.

> Thanks
> Gokul
 
Dear Ken,

Thanks for your reply. I read the links, sorry learned from the links.

Now I have new problem. I changed the Outlook version 2003 in development

machine, it is perfect in my machine. I tried to install on another machine

XP and Outlook 2007. God saved me, from the problem for a while. But it is

not happen for long. I extend my testing, I tried in Windows Vista and

Outlook 2007. Nothing happens, I found my add-in in inactive

application(unloaded). For me It is like treasure hunt. Also tried to change

regedit path but nothing happens. I need your help on this.

Thanks

Gokul
wrote:


> OK, first basic thing is that you develop on a machine that has the oldest
> version of Outlook installed on it that you intend to support. So you'd need
> a machine with Outlook 2003 installed on it to support Outlook 2003 and 2007
> (and soon 2010).

> The other questions I asked are so basic that you really need to start at
> the beginning. I don't know of any specific books on shared addins but you
> can get some basics on that either from my book or Randy Byrne's book on
> Outlook 2007 programming. You can also read some of the development articles
> at MSDN. I'll list some that are useful.

> Shimming, Shim Wizard: http://msdn.microsoft.com/en-us/library/bb508939.aspx

> Deploying PIA's in a setup project:
> http://blog.developers.ie/CGreen/archive/2006/10/27/2427.aspx

> Deployment (specific for VSTO but useful anyway):
> http://msdn.microsoft.com/en-us/library/aa537173(office.11).aspx

> I'd also go to www.outlookcode.com and review all the information there on
> COM addins, there are lots of articles and references there.

> >

>

> "Gokul" <Gokul> wrote in message
> news:32F87DAE-7308-4025-9123-6D5FAE12F7F6@microsoft.com...
> > Dear Ken,
> > Thanks for your reply.
> > What version of Outlook was used on the development machine?
> > Outlook 2007
> > What versions are you deploying to and supporting?
> > Outlook 2003 and 2007
> > Are you shimming your addin? Are you strong naming your addin? Do you have
> > a
> > manifest file? What sort of installer are you using? Are you deploying all
> > dependencies and requirements? Is the Framework of the correct version
> > installed where it's failing? Are the PIA's installed?
> > I am totally new to this. I have read about the above, and I am not clear
> > with that. It is possible give me tutorial links it would help me.
> > Also whether any books available to read about developing and deploying
> > for
> > shared add-in.
> > Thanks
> > Gokul

> .
>
 
If an addin is in the inactive list it's almost always the deployment

machine missing a dependency. It can also be a dll that needs to be

registered and isn't. Usually you use an error log to see if the code is

actually being executed before some exception caused the addin to fail. If

the addin never gets to the error log then it's usually a load failure,

again due to a missing piece.

If that's the case you need to use Fusion logging to see where things are

failing. Fusion is the managed code loader. Take a look at

http://blogs.msdn.com/vsod/archive/2008/04/22/Troubleshooting-com-add-in-load-failures.aspx,

which has invaluable information for troubleshooting managed code loading

problems, including Fusion logging.

"Gokul" <Gokul> wrote in message

news:066F7D9B-A924-456A-93DD-B46AE0E866CD@microsoft.com...
> Dear Ken,

> Thanks for your reply. I read the links, sorry learned from the links.

> Now I have new problem. I changed the Outlook version 2003 in development
> machine, it is perfect in my machine. I tried to install on another
> machine
> XP and Outlook 2007. God saved me, from the problem for a while. But it is
> not happen for long. I extend my testing, I tried in Windows Vista and
> Outlook 2007. Nothing happens, I found my add-in in inactive
> application(unloaded). For me It is like treasure hunt. Also tried to
> change
> regedit path but nothing happens. I need your help on this.

> Thanks
> Gokul
 
I got an issue like this "System.IO.FileNotFoundException: Could not load

file or assembly 'Interop.Microsoft.Office.Core" I could not proceed further.

Can some one help.
wrote:


> If an addin is in the inactive list it's almost always the deployment
> machine missing a dependency. It can also be a dll that needs to be
> registered and isn't. Usually you use an error log to see if the code is
> actually being executed before some exception caused the addin to fail. If
> the addin never gets to the error log then it's usually a load failure,
> again due to a missing piece.

> If that's the case you need to use Fusion logging to see where things are
> failing. Fusion is the managed code loader. Take a look at
> http://blogs.msdn.com/vsod/archive/2008/04/22/Troubleshooting-com-add-in-load-failures.aspx,
> which has invaluable information for troubleshooting managed code loading
> problems, including Fusion logging.

> >

>

> "Gokul" <Gokul> wrote in message
> news:066F7D9B-A924-456A-93DD-B46AE0E866CD@microsoft.com...
> > Dear Ken,
> > Thanks for your reply. I read the links, sorry learned from the links.
> > Now I have new problem. I changed the Outlook version 2003 in development
> > machine, it is perfect in my machine. I tried to install on another
> > machine
> > XP and Outlook 2007. God saved me, from the problem for a while. But it is
> > not happen for long. I extend my testing, I tried in Windows Vista and
> > Outlook 2007. Nothing happens, I found my add-in in inactive
> > application(unloaded). For me It is like treasure hunt. Also tried to
> > change
> > regedit path but nothing happens. I need your help on this.
> > Thanks
> > Gokul

> .
>
 
That sounds like the Office and possibly the Outlook PIA's aren't installed

in the GAC. Do you set a project prerequisite for that?

"Gokul" <Gokul> wrote in message

news:F77D8CB1-8AE4-4CEB-9943-AF788FD706C6@microsoft.com...
> I got an issue like this "System.IO.FileNotFoundException: Could not load
> file or assembly 'Interop.Microsoft.Office.Core" I could not proceed
> further.
> Can some one help.
 
Status
Not open for further replies.
< Save Current email in Directory. | Programatically click the Send button. >
Similar threads
Thread starter Title Forum Replies Date
M Form region not appearing on machines I deploy to? Outlook VBA and Custom Forms 6
L new outlook contacts searching Using Outlook 2
R Outlook 2010 Outlook 2010 migration question Using Outlook 2
W New Outlook PEOPLE blank Using Outlook 7
C New Outlook issues with Gmail, particularly labels/folders Using Outlook 4
E What is the next workaround for macro in New Outlook 1.2025.1111.100 Outlook VBA and Custom Forms 3
E Need to digitally sign macro but VBA\Outlook crash Outlook VBA and Custom Forms 4
P Outlook 2003 no longer opens "without" Folder List Showing in Navigation Pane Using Outlook 2
Hornblower409 Outlook 2010 - Never ending update Using Outlook 0
V Outlook created new profile? Using Outlook 1
J Outlook inbox question Using Outlook 4
T How to Add AT&T Contacts to Outlook 365 Using Outlook 7
F Outlook 2021 outlook on iPhone Using Outlook 1
F Outlook 2021 Outlook on iPhone asks for password Using Outlook 0
P ics calendar entries suddenly open up new Outlook Using Outlook 3
P Outlook "forgets" password until system rebooted Using Outlook 2
N Why does Outlook keeping adding to the email address I have in my notes portion of a contact? Using Outlook 2
M Anyone integrated AI website builders with Outlook for automated client communications? Using Outlook 1
V Gmail in Outlook Using Outlook 2
T Where has the Copilot icon gone in my Outlook desktop client? Using Outlook 6
P New way by Microsoft to get people to use the new Outlook Using Outlook 4
C How to keep emails in account in Outlook after closing the IMAP account Using Outlook 1
cymumtaz IMAP calendars in New Outlook Using Outlook 5
T Constantly Have To Log In To Outlook On The Web Using Outlook.com accounts in Outlook 2
T Cannot Find Outlook Noted On Android Using Outlook 4
O Outlook 2024 not showing that messages are replied to or forwarded Using Outlook 3
C Outlook 365 send/receive takes FOREVER - as in 40 minutes Using Outlook 7
I Outlook 2024 LTSC syncing with iCloud calendar - can only make appt. in iCloud Using Outlook 2
Kika Melo Outlook ribbon customisations do not 'stick' Using Outlook 12
J IMAP Folders Confusion in Windows Classic Outlook Using Outlook 1
A Missing Sent Emails in New Outlook Using Outlook 18
S Missing categories in Outlook calendar Using Outlook 10
P Windows 11 tries to open New Outlook when the user clicks on the mail icon on a news article Using Outlook 2
C I don't understand Outlook or Microsoft, anymore Using Outlook 12
P My Feedback to Microsoft and their response; also New Outlook roadmap Using Outlook 0
A New Outlook - Cannot drag IMAP emails to Task List in MyDay Using Outlook 1
L Android Outlook Doesn't Update PC Notification Changes Using Outlook 0
A How to open Excel file saved in Outlook folder? Outlook VBA and Custom Forms 4
D.Moore Outlook desktop client suggested searches question Using Outlook 22
Y Outlook 2016 (64-bit) Copy Local Cal. Events to Another Cal. with Modified Reminder time Using Outlook 2
T Outlook 2019 While connecting an IMAP account in "classic" Outlook 2024 I caused a massive duplication of emails on the server (death loop) Using Outlook 5
D Cannot logon to Outlook.com, or outlook on Mac, outlook not updating on ipad, iphone Using Outlook 1
J unable to get my new install of Outlook to display mailboxes in the single-line format. Using Outlook 1
D Legacy Microsoft Outlook for Mac Support will end in Oct 2025 Using Outlook 8
C Nasty Bug Lurking In Outlook For Years. The Trigger. Any Fix Or Workaround? Using Outlook 12
R Auto clicking Hyperlink in outlook Outlook VBA and Custom Forms 7
ughlook Open multiple contacts in NEW Outlook? Using Outlook 3
G Outlook translation feature is off Using Outlook 2
J Outlook 2010 does not let me put any account Using Outlook.com accounts in Outlook 3
P 3 of 5 PST files don't install from d:\outlook but only from D:\ Using Outlook 7

Similar threads

Back
Top