Macro to update imported contacts

  • Thread starter Faraz A. Qureshi
  • Start date
Status
Not open for further replies.
F

Faraz A. Qureshi

Upon transfer of my contacts from a cell to the Outlook contacts I have found

that the numbers are not being displayed in full and the country code is

missing.

Any idea/macro how to have all the contact numbers have a country code "+92"

(Pakistan) be inserted in all in a single go?

Thanx in advance.

Faraz
 
Please show the code you're using the set the value of the ContactItem phone

number properties.

Sue Mosher

"Faraz A. Qureshi" <FarazAQureshi> wrote in

message news:432CEB36-750D-4570-ADBE-0D6D35F23918@microsoft.com...
> Upon transfer of my contacts from a cell to the Outlook contacts I have
> found
> that the numbers are not being displayed in full and the country code is
> missing.

> Any idea/macro how to have all the contact numbers have a country code
> "+92"
> (Pakistan) be inserted in all in a single go?

> Thanx in advance.
> > ,

> Faraz
 
I don't have any. In fact, that is what I am looking for!

Do check "Yes" if this post is helpful,

Faraz

"Sue Mosher [MVP]" wrote:


> Please show the code you're using the set the value of the ContactItem phone
> number properties.

> > Sue Mosher
> > >

> "Faraz A. Qureshi" <FarazAQureshi> wrote in
> message news:432CEB36-750D-4570-ADBE-0D6D35F23918@microsoft.com...
> > Upon transfer of my contacts from a cell to the Outlook contacts I have
> > found
> > that the numbers are not being displayed in full and the country code is
> > missing.
> > Any idea/macro how to have all the contact numbers have a country code
> > "+92"
> > (Pakistan) be inserted in all in a single go?
> > Thanx in advance.
> > > > ,
> > Faraz


>
 
Between the code samples listed at

http://www.outlookcode.com/article.aspx?ID=23 and the object browser (F2 in

VBA) to give you the names of fields, you should have everything you need to

put this together to meet your specific requirements.

Sue Mosher

"Faraz A. Qureshi" <FarazAQureshi> wrote in

message news:58DE121A-C3DF-4EE9-B3D0-9C998EC75002@microsoft.com...
> I don't have any. In fact, that is what I am looking for!
> > Do check "Yes" if this post is helpful,
> ,

> Faraz

> "Sue Mosher [MVP]" wrote:
>
> > Please show the code you're using the set the value of the ContactItem
> > phone
> > number properties.
>

>> "Faraz A. Qureshi" <FarazAQureshi> wrote in
> > message news:432CEB36-750D-4570-ADBE-0D6D35F23918@microsoft.com...
> > > Upon transfer of my contacts from a cell to the Outlook contacts I have
> > > found
> > > that the numbers are not being displayed in full and the country code
> > > is
> > > missing.
> >> > Any idea/macro how to have all the contact numbers have a country code
> > > "+92"
> > > (Pakistan) be inserted in all in a single go?
> >> > Thanx in advance.
> > > > > > ,
> >> > Faraz

>

>
>>
 
Sorry Sue,

Tried my level best but can't achieve/develop the required code. Can you

simply devise a code to change or add country code "+92" to all the existing

contacts' mobile/home office numbers?

Faraz

"Sue Mosher [MVP]" wrote:


> Between the code samples listed at
> http://www.outlookcode.com/article.aspx?ID=23 and the object browser (F2 in
> VBA) to give you the names of fields, you should have everything you need to
> put this together to meet your specific requirements.

> > Sue Mosher
> > >

> "Faraz A. Qureshi" <FarazAQureshi> wrote in
> message news:58DE121A-C3DF-4EE9-B3D0-9C998EC75002@microsoft.com...
> >I don't have any. In fact, that is what I am looking for!
> > > > Do check "Yes" if this post is helpful,
> > ,
> > Faraz
> > "Sue Mosher [MVP]" wrote:
> >
> >> Please show the code you're using the set the value of the ContactItem
> >> phone
> >> number properties.
> >
> >> "Faraz A. Qureshi" <FarazAQureshi> wrote in
> >> message news:432CEB36-750D-4570-ADBE-0D6D35F23918@microsoft.com...
> >> > Upon transfer of my contacts from a cell to the Outlook contacts I have
> >> > found
> >> > that the numbers are not being displayed in full and the country code
> >> > is
> >> > missing.
> >> >> > Any idea/macro how to have all the contact numbers have a country code
> >> > "+92"
> >> > (Pakistan) be inserted in all in a single go?
> >> >> > Thanx in advance.
> >> > > >> > ,
> >> >> > Faraz
> >
> >
> >>


>
 
It's very hard to help you figure you where you're going wrong unless you

share the code you've written and indicate where you have encountered

problems.

You might compare this with what you already have:

On Error Resume Next

Set objFolder = Application.session.GetDefaultFolder(olFolderContacts)

If Not objFolder Is Nothing Then

Set objItems = objFolder.Items

For Each objItem In objItems

' make sure you have a Contact item

If objItem.Class = olContact Then

Set objContact = objItem

With objContact

> MobileTelephoneNumber = _

"+92 " & objContact.MobileTelephoneNumber

> BusinessTelephoneNumber = _

"+92 " & objContact.MobileTelephoneNumber

> Save

Next

End If

End If

Sue Mosher

"Faraz A. Qureshi" <FarazAQureshi> wrote in

message news:F7BF3816-1B3F-4278-B444-7A7037156075@microsoft.com...
> Sorry Sue,

> Tried my level best but can't achieve/develop the required code. Can you
> simply devise a code to change or add country code "+92" to all the
> existing
> contacts' mobile/home office numbers?

> > ,

> Faraz

> "Sue Mosher [MVP]" wrote:
>
> > Between the code samples listed at
> > http://www.outlookcode.com/article.aspx?ID=23 and the object browser (F2
> > in
> > VBA) to give you the names of fields, you should have everything you need
> > to
> > put this together to meet your specific requirements.
>

>> "Faraz A. Qureshi" <FarazAQureshi> wrote in
> > message news:58DE121A-C3DF-4EE9-B3D0-9C998EC75002@microsoft.com...
> > >I don't have any. In fact, that is what I am looking for!
> > > > > > Do check "Yes" if this post is helpful,
> > > ,
> >> > Faraz
> >>> > "Sue Mosher [MVP]" wrote:
> >> >> Please show the code you're using the set the value of the ContactItem
> > >> phone
> > >> number properties.
> > >
>> >> "Faraz A. Qureshi" <FarazAQureshi> wrote in
> > >> message news:432CEB36-750D-4570-ADBE-0D6D35F23918@microsoft.com...
> > >> > Upon transfer of my contacts from a cell to the Outlook contacts I
> > >> > have
> > >> > found
> > >> > that the numbers are not being displayed in full and the country
> > >> > code
> > >> > is
> > >> > missing.
> > >>> >> > Any idea/macro how to have all the contact numbers have a country
> > >> > code
> > >> > "+92"
> > >> > (Pakistan) be inserted in all in a single go?
> > >>> >> > Thanx in advance.
> > >> > > > >> > ,
> > >>> >> > Faraz
> > >
>> >
>> >>

>

>
>>
 
Thanx for all your help Sue,

The code works well enough! However, I did get to manage the same by

exporting the contacts to *.csv, inserting "+92 " to all via concatenating

and and then re-importing the same file.

Thanx again 4 all your help, I really appreciate the same!

Faraz

"Sue Mosher [MVP]" wrote:


> It's very hard to help you figure you where you're going wrong unless you
> share the code you've written and indicate where you have encountered
> problems.

> You might compare this with what you already have:

> On Error Resume Next
> Set objFolder = Application.session.GetDefaultFolder(olFolderContacts)
> If Not objFolder Is Nothing Then
> Set objItems = objFolder.Items
> For Each objItem In objItems
> ' make sure you have a Contact item
> If objItem.Class = olContact Then
> Set objContact = objItem
> With objContact
> .MobileTelephoneNumber = _
> "+92 " & objContact.MobileTelephoneNumber
> .BusinessTelephoneNumber = _
> "+92 " & objContact.MobileTelephoneNumber
> .Save
> Next
> End If
> End If

> > Sue Mosher
> > >

> "Faraz A. Qureshi" <FarazAQureshi> wrote in
> message news:F7BF3816-1B3F-4278-B444-7A7037156075@microsoft.com...
> > Sorry Sue,
> > Tried my level best but can't achieve/develop the required code. Can you
> > simply devise a code to change or add country code "+92" to all the
> > existing
> > contacts' mobile/home office numbers?
> > > > ,
> > Faraz
> > "Sue Mosher [MVP]" wrote:
> >
> >> Between the code samples listed at
> >> http://www.outlookcode.com/article.aspx?ID=23 and the object browser (F2
> >> in
> >> VBA) to give you the names of fields, you should have everything you need
> >> to
> >> put this together to meet your specific requirements.
> >
> >> "Faraz A. Qureshi" <FarazAQureshi> wrote in
> >> message news:58DE121A-C3DF-4EE9-B3D0-9C998EC75002@microsoft.com...
> >> >I don't have any. In fact, that is what I am looking for!
> >> > > >> > Do check "Yes" if this post is helpful,
> >> > ,
> >> >> > Faraz
> >> >> >> > "Sue Mosher [MVP]" wrote:
> >> >> >> Please show the code you're using the set the value of the ContactItem
> >> >> phone
> >> >> number properties.
> >> >
> >> >> "Faraz A. Qureshi" <FarazAQureshi> wrote in
> >> >> message news:432CEB36-750D-4570-ADBE-0D6D35F23918@microsoft.com...
> >> >> > Upon transfer of my contacts from a cell to the Outlook contacts I
> >> >> > have
> >> >> > found
> >> >> > that the numbers are not being displayed in full and the country
> >> >> > code
> >> >> > is
> >> >> > missing.
> >> >> >> >> > Any idea/macro how to have all the contact numbers have a country
> >> >> > code
> >> >> > "+92"
> >> >> > (Pakistan) be inserted in all in a single go?
> >> >> >> >> > Thanx in advance.
> >> >> > > >> >> > ,
> >> >> >> >> > Faraz
> >> >
> >> >
> >> >
> >
> >
> >>


>
 
Status
Not open for further replies.
Similar threads
Thread starter Title Forum Replies Date
J Outlook Macro to Update Sharepoint Excel File Using Outlook 1
Bachelle Macro to Update Existing Task from New Email Outlook VBA and Custom Forms 3
B Looking for Outlook 2013 update for Send Drafts Macro Using Outlook 4
X Custom icon (not from Office 365) for a macro in Outlook Outlook VBA and Custom Forms 1
X Run macro automatically when a mail appears in the sent folder Using Outlook 5
mrrobski68 Issue with Find messages in a conversation macro Outlook VBA and Custom Forms 1
G Creating Macro to scrape emails from calendar invite body Outlook VBA and Custom Forms 6
M Use Macro to change account settings Outlook VBA and Custom Forms 0
J Macro to Reply to Emails w/ Template Outlook VBA and Custom Forms 3
C Outlook - Macro to block senders domain - Macro Fix Outlook VBA and Custom Forms 1
Witzker Outlook 2019 Macro to seach in all contact Folders for marked Email Adress Outlook VBA and Custom Forms 1
S macro error 4605 Outlook VBA and Custom Forms 0
A Macro Mail Alert Using Outlook 4
J Outlook 365 Outlook Macro to Sort emails by column "Received" to view the latest email received Outlook VBA and Custom Forms 0
J Macro to send email as alias Outlook VBA and Custom Forms 0
M Outlook Macro to save as Email with a file name format : Date_Timestamp_Sender initial_Email subject Outlook VBA and Custom Forms 0
Witzker Outlook 2019 Macro GoTo user defined search folder Outlook VBA and Custom Forms 6
D Outlook 2016 Creating an outlook Macro to select and approve Outlook VBA and Custom Forms 0
Witzker Outlook 2019 Macro to send an Email Template from User Defined Contact Form Outlook VBA and Custom Forms 0
Witzker Outlook 2019 Macro to check Cursor & Focus position Outlook VBA and Custom Forms 8
V Macro to mark email with a Category Outlook VBA and Custom Forms 4
M Outlook 2019 Macro not working Outlook VBA and Custom Forms 0
S Outlook 365 Help me create a Macro to make some received emails into tasks? Outlook VBA and Custom Forms 1
Geldner Send / Receive a particular group via macro or single keypress Using Outlook 1
D Auto Remove [EXTERNAL] from subject - Issue with Macro Using Outlook 21
V Macro to count flagged messages? Using Outlook 2
sophievldn Looking for a macro that moves completed items from subfolders to other subfolder Outlook VBA and Custom Forms 7
S Outlook Macro for [Date][Subject] Using Outlook 1
E Outlook - Macro - send list of Tasks which are not finished Outlook VBA and Custom Forms 3
E Macro to block senders domain Outlook VBA and Custom Forms 1
D VBA Macro to Print and Save email to network location Outlook VBA and Custom Forms 1
N VBA Macro To Save Emails Outlook VBA and Custom Forms 1
N Line to move origEmail to subfolder within a reply macro Outlook VBA and Custom Forms 0
Witzker Outlook 2019 Macro to answer a mail with attachments Outlook VBA and Custom Forms 2
A Outlook 2016 Macro to Reply, ReplyAll, or Forward(but with composing new email) Outlook VBA and Custom Forms 0
J Macro to Insert a Calendar Outlook VBA and Custom Forms 8
W Macro to Filter Based on Latest Email Outlook VBA and Custom Forms 6
T Macro to move reply and original message to folder Outlook VBA and Custom Forms 6
D Autosort macro for items in a view Outlook VBA and Custom Forms 2
S HTML to Plain Text Macro - Help Outlook VBA and Custom Forms 1
A Macro to file emails into subfolder based on subject line Outlook VBA and Custom Forms 1
N Help creating a VBA macro with conditional formatting to change the font color of all external emails to red Outlook VBA and Custom Forms 5
S Visual indicator of a certain property or to show a macro toggle Outlook VBA and Custom Forms 2
L Modifying VBA script to delay running macro Outlook VBA and Custom Forms 3
S Macro to extract and modify links from emails Outlook VBA and Custom Forms 3
M Replyall macro with template and auto insert receptens Outlook VBA and Custom Forms 1
L Macro to add Date & Time etc to "drag to save" e-mails Outlook VBA and Custom Forms 17
S Macro for Loop through outlook unread emails Outlook VBA and Custom Forms 2
Globalforester ItemAdd Macro - multiple emails Outlook VBA and Custom Forms 3
S Macro to extract email addresses of recipients in current drafted email and put into clipboard Outlook VBA and Custom Forms 2

Similar threads

Back
Top