Email Autolink Works Sporadically

Status
Not open for further replies.
B

Bill Mack

I find that Email Autolink only works sometimes. I use it to link emails I

receive to difference Business Projects. I try to be careful to check both

the email address in the first tab and the relevant Business Project in the

second tab. On many occasions, however, even after I have done this, I find

that the next email I receive from the same address is not linked to the

Project, as it should be.

I have the feeling (but have not conducted a real study) that if I link the

FIRST email I receive from a new contact to a particular Business Project,

Email Autolink tends to work, but if I try it with later emails, it does not

do so well.

Any thoughts on what I may be doing wrong or have not done right?

Bill Mack
 
Let me add some detail to my issue, so that perhaps others will recognze the

problem and suggest a solution.

The e-mail form in Outlook 2007 has a ribbon across its top called

"Message". In that ribbon is a panel called "Business Contact Manager".

That panel contains two buttons, "Link to Record" and "E-Mail Auto-link".

The "Link to Record" button allows you to manually link that particular

e-mail to an Account, a Business Contact, an Opportunity or a Business

Project in BCM. If you use that button only, then each e-mail has to be

manually linked. The "E-mail Auto-link" button seems to offer a partial and

automated alternative to manual linking. It seems to offer the option to

link an e-mail address to a Business Project in BCM, and thus to

automatically link future e-mails from that same address to the selected

Business Project.

Here is how I think it works, or should work. When I receive an email from

say "joe@yaha.com", I click "Email Auto-Link" at the top of the e-mail. This

opens a box titled "Select Addresses and Business Projects to Link". There

are two tabs in the box; a tab called "E-mail Addresses", which shows the

e-mail address joe@yaha.com with a check box, and a tab called "Business

Contact Manager Projects", which lists all my Business Projects with check

boxes next to them.

I think what is SUPPOSED to happen is that by checking the box for

joe@yaha.com on the first tab and the box for a Business Project (say "Smith

v. Jones") on the second, I am linking joe@yaha.com to the Business Project

Smith v. Jones for the present e-mail and all e-mails I receive in the future

that contain this address.

The benefit of course is avoiding the time needed to manually link every

future e-mail for joe@yaha.com to Smith v. Jones.

What I find, though, is that this auto-link feature works well sometimes and

not at all in other times. For example, it may be that I used the auto-link

as described above, but the next e-mail from joe@yada.com is not linked to

Smith v. Jones when I open it and check it. So I have to manually link it.

Sometimes the auto-linking will work for a while, and then mysteriously stop

working for a particular address. Sometimes the utility goes a little crazy

and links an e-mail address to more than one Business Project, including

Projects to which the address has no relevance and was never auto-linked.

I have spent a lot of time explaining my problem. I hope someone out there

has a good suggestion. Thanks for listening.

"Bill Mack" wrote:


> I find that Email Autolink only works sometimes. I use it to link emails I
> receive to difference Business Projects. I try to be careful to check both
> the email address in the first tab and the relevant Business Project in the
> second tab. On many occasions, however, even after I have done this, I find
> that the next email I receive from the same address is not linked to the
> Project, as it should be.

> I have the feeling (but have not conducted a real study) that if I link the
> FIRST email I receive from a new contact to a particular Business Project,
> Email Autolink tends to work, but if I try it with later emails, it does not
> do so well.

> Any thoughts on what I may be doing wrong or have not done right?
> > Bill Mack
 
Hi Bill

We started using BCM without linking our emails to our projects, and now I

am going through the same process as you.

Instead of linking the records from the email ribbon as you have done, I

link them through the top task bar (File - Edit - View) by clicking on

Business Contact Manager and choosing "Manage Email Auto Linking". I get the

same screen, choose an email, then on the next tab choose the folders, and

they seem to be staying linked. This links all of the PAST emails, but not

the future.

To link the future emails then I open their Business Contact and choose

"Email Auto-Link" on the top ribbon. They do seem to stay linked.

After that I think you would have to link it to the project - not sure.

We are running into several different issues: for instance, one of our

clients changed email addresses. I have to have their old (and obsolete

address) in their contact form in order to link past emails; however if I do

a bulk email now, that old address will be exported.

Also, I'm unsure how to make BCM link several clients to one vendor or

account and have the vendor emails link to the individual clients.

I hope this helps!

Jackie Lampiasi

"Bill Mack" wrote:


> Let me add some detail to my issue, so that perhaps others will recognze the
> problem and suggest a solution.

> The e-mail form in Outlook 2007 has a ribbon across its top called
> "Message". In that ribbon is a panel called "Business Contact Manager".
> That panel contains two buttons, "Link to Record" and "E-Mail Auto-link".
> The "Link to Record" button allows you to manually link that particular
> e-mail to an Account, a Business Contact, an Opportunity or a Business
> Project in BCM. If you use that button only, then each e-mail has to be
> manually linked. The "E-mail Auto-link" button seems to offer a partial and
> automated alternative to manual linking. It seems to offer the option to
> link an e-mail address to a Business Project in BCM, and thus to
> automatically link future e-mails from that same address to the selected
> Business Project.

> Here is how I think it works, or should work. When I receive an email from
> say "joe@yaha.com", I click "Email Auto-Link" at the top of the e-mail. This
> opens a box titled "Select Addresses and Business Projects to Link". There
> are two tabs in the box; a tab called "E-mail Addresses", which shows the
> e-mail address joe@yaha.com with a check box, and a tab called "Business
> Contact Manager Projects", which lists all my Business Projects with check
> boxes next to them.

> I think what is SUPPOSED to happen is that by checking the box for
> joe@yaha.com on the first tab and the box for a Business Project (say "Smith
> v. Jones") on the second, I am linking joe@yaha.com to the Business Project
> Smith v. Jones for the present e-mail and all e-mails I receive in the future
> that contain this address.

> The benefit of course is avoiding the time needed to manually link every
> future e-mail for joe@yaha.com to Smith v. Jones.

> What I find, though, is that this auto-link feature works well sometimes and
> not at all in other times. For example, it may be that I used the auto-link
> as described above, but the next e-mail from joe@yada.com is not linked to
> Smith v. Jones when I open it and check it. So I have to manually link it.
> Sometimes the auto-linking will work for a while, and then mysteriously stop
> working for a particular address. Sometimes the utility goes a little crazy
> and links an e-mail address to more than one Business Project, including
> Projects to which the address has no relevance and was never auto-linked.

> I have spent a lot of time explaining my problem. I hope someone out there
> has a good suggestion. Thanks for listening.

> "Bill Mack" wrote:
>
> > I find that Email Autolink only works sometimes. I use it to link emails I
> > receive to difference Business Projects. I try to be careful to check both
> > the email address in the first tab and the relevant Business Project in the
> > second tab. On many occasions, however, even after I have done this, I find
> > that the next email I receive from the same address is not linked to the
> > Project, as it should be.
> > I have the feeling (but have not conducted a real study) that if I link the
> > FIRST email I receive from a new contact to a particular Business Project,
> > Email Autolink tends to work, but if I try it with later emails, it does not
> > do so well.
> > Any thoughts on what I may be doing wrong or have not done right?
> > > > Bill Mack
 
Status
Not open for further replies.
Similar threads
Thread starter Title Forum Replies Date
P Email address auto-completes work fine on laptop, but no longer on desktop Using Outlook 2
S Create Outlook Task from Template and append Body with Email Body Outlook VBA and Custom Forms 4
H Copying email address(es) in body of email and pasting in To field Outlook VBA and Custom Forms 1
A Search folder and move the email Outlook VBA and Custom Forms 0
P VBA to add email address to Outlook 365 rule Outlook VBA and Custom Forms 0
farrissf Outlook 2016 Optimizing Email Searches in Outlook 2016: Seeking Insights on Quick Search vs Advanced Search Features Using Outlook 0
D Delete selected text in outgoing email body Outlook VBA and Custom Forms 0
F Graphics in email / Mac recipient garbled Using Outlook 0
D Outlook VBA forward the selected email to the original sender’s email ID (including the email used in TO, CC Field) from the email chain Outlook VBA and Custom Forms 2
Witzker Outlook 2019 Macro to seach in all contact Folders for marked Email Adress Outlook VBA and Custom Forms 1
E Outlook 365 Save Selected Email Message as .msg File - oMail.Delete not working when SEARCH Outlook VBA and Custom Forms 0
S Email Macros to go to a SHARED Outlook mailbox Draft folder...NOT my personal Outlook Draft folder Using Outlook 2
R Outlook 365 VBA AUTO SEND WITH DELAY FOR EACH EMAIL Outlook VBA and Custom Forms 0
G Print email attachments when hit subfolder Outlook VBA and Custom Forms 1
C Spam Email? Using Outlook 2
G Automatically delete email when a condition is met Outlook VBA and Custom Forms 1
E Save Selected Email Message as .msg File - digitally sign email doesn't works Outlook VBA and Custom Forms 1
S Email was migrated from GoDaddy to Microsoft exchange. We lost IMAP ability Exchange Server Administration 1
R Outlook 365 How to integrate a third-party app with Outlook to track email and sms? Using Outlook 2
S Paperclip icon shows without attachment in email under Sent folder Using Outlook 0
B Outlook 2019 Automatically move email after assigning category Using Outlook 4
Rupert Dragwater How to permanently remove an email address Using Outlook 9
K vba code to auto download email into a specific folder in local hard disk as and when any new email arrives in Inbox/subfolder Outlook VBA and Custom Forms 0
F Auto changing email subject line in bulk Using Outlook 2
F Want to add second email to Outlook for business use Using Outlook 4
kburrows Outlook Email Body Text Disappears/Overlaps, Folders Switch Around when You Hover, Excel Opens Randomly and Runs in the Background - Profile Corrupt? Using Outlook 0
J Outlook 365 Outlook Macro to Sort emails by column "Received" to view the latest email received Outlook VBA and Custom Forms 0
A Outlook 2019 Help with forwarding email without mentioning the previous email sender. Outlook VBA and Custom Forms 0
J Macro to send email as alias Outlook VBA and Custom Forms 0
M Shift Delete doesn't delete email from server Using Outlook 3
K Incorporate selection from combobox into body of email Outlook VBA and Custom Forms 0
L Why are some email automatically going to "archive" Using Outlook 2
M Outlook Macro to save as Email with a file name format : Date_Timestamp_Sender initial_Email subject Outlook VBA and Custom Forms 0
B Outlook 2019 Custom Email form - Edit default email form Outlook VBA and Custom Forms 6
F Add a category before "Send an Email When You Add an Appointment to Your Calendar" Outlook VBA and Custom Forms 0
T Problem when requesting to view an email in a browser Using Outlook 0
J Outlook 365 Forward Email Subject to my inbox when new email arrive in shared inbox Using Outlook 0
HarvMan Archive Email Manually Using Outlook 1
L Fetch, edit and forward an email with VBA outlook Outlook VBA and Custom Forms 2
S New Email "From" box stopped working Using Outlook 0
Rupert Dragwater Duplicate email in Folder Using Outlook 7
M "Attachment Detacher for Outlook" add in, does it update the server copy of the email? Using Outlook 1
W Outlook 365 I am getting the "Either there is no default mail client" error when I try to send an email on excel Office 365 Using Outlook 1
MattC Changing the font of an email with VBA Outlook VBA and Custom Forms 1
L Specific Incoming Email Address Immediately Deleted Using Outlook 2
Witzker Outlook 2019 Macro to send an Email Template from User Defined Contact Form Outlook VBA and Custom Forms 0
Witzker Outlook 2019 Edit contact from email does not open the user defined contactform Using Outlook 3
V Macro to mark email with a Category Outlook VBA and Custom Forms 4
R Roadrunner Email Settings | Contact Roadrunner Customer Support Outlook VBA and Custom Forms 0
D Gmail mail is being delivered to a different email inbox in Outlook App 2021 Using Outlook 2

Similar threads

Back
Top