Email unique id

Status
Not open for further replies.
H

Harry

Hi,

This is a developer q's.....currently when an email comes in the user

imports it to our local database. Now, if the same email is received

by three different people......how do i notify the others if one of

them has already stored the email....?

Is ther a unique email id property that i can use?

Thanks!
 
PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.

You can access it through MailItem.PropertyAccessor in Outlook 2007.

Dmitry Streblechenko (MVP)

-

"Harry" <silver.planet.inc@gmail.com> wrote in message

news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...
> Hi,
> This is a developer q's.....currently when an email comes in the user
> imports it to our local database. Now, if the same email is received
> by three different people......how do i notify the others if one of
> them has already stored the email....?

> Is ther a unique email id property that i can use?

> Thanks!
 
Thanks a lot Dimitry for your reply, is the above property guaranteed

to remain unique in all cases..... if the mail item has been moved,

copied etc?

Thank you!

On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
wrote:
> PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> You can access it through MailItem.PropertyAccessor in Outlook 2007.

> > Dmitry Streblechenko (MVP)
> OutlookSpy  - Outlook, CDO
>

> -"Harry" <silver.planet....@gmail.com> wrote in message

> news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...
>
> > Hi,
> > This is a developer q's.....currently when an email comes in the user
> > imports it to our local database. Now, if the same email is received
> > by three different people......how do i notify the others if one of
> > them has already stored the email....?

>
> > Is ther a unique email id property that i can use?

>
> > Thanks!
 
Also, this just occured to me.....since the prop says

internet_header .... wht abt messages sent in intra-organizational

Exchange emails not the ones sent over the internet??

Again, thank you for your time and patience!!

On Aug 11, 8:16 am, Harry <silver.planet....@gmail.com> wrote:
> Thanks a lot Dimitry for your reply, is the above property guaranteed
> to remain unique in all cases..... if the mail item has been moved,
> copied etc?

> Thank you!

> On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
> wrote:
>
> > PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> > You can access it through MailItem.PropertyAccessor in Outlook 2007.

>
> > > > Dmitry Streblechenko (MVP)
> > OutlookSpy  - Outlook, CDO
> >

> > -"Harry" <silver.planet....@gmail.com> wrote in message

>
> >news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com....

>
> > > Hi,
> > > This is a developer q's.....currently when an email comes in the user
> > > imports it to our local database. Now, if the same email is received
> > > by three different people......how do i notify the others if one of
> > > them has already stored the email....?

>
> > > Is ther a unique email id property that i can use?

>
> > > Thanks!
 
The property should stay unchanged.

Dmitry Streblechenko (MVP)

-

"Harry" <silver.planet.inc@gmail.com> wrote in message

news:afbd6640-f1a3-4c61-a008-fd82e2b95b77@f33g2000vbm.googlegroups.com...

Thanks a lot Dimitry for your reply, is the above property guaranteed

to remain unique in all cases..... if the mail item has been moved,

copied etc?

Thank you!

On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
wrote:
> PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> You can access it through MailItem.PropertyAccessor in Outlook 2007.

> > Dmitry Streblechenko (MVP)
>

>

> -"Harry" <silver.planet....@gmail.com> wrote in message

> news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...
>
> > Hi,
> > This is a developer q's.....currently when an email comes in the user
> > imports it to our local database. Now, if the same email is received
> > by three different people......how do i notify the others if one of
> > them has already stored the email....?

>
> > Is ther a unique email id property that i can use?

>
> > Thanks!
 
Exchange 2007 always creates that property. Not sure about Exchange 2003.

Dmitry Streblechenko (MVP)

-

"Harry" <silver.planet.inc@gmail.com> wrote in message

news:da13d0bd-f0d3-4fb0-9d0c-8339d0ce80f0@n2g2000vba.googlegroups.com...

Also, this just occured to me.....since the prop says

internet_header .... wht abt messages sent in intra-organizational

Exchange emails not the ones sent over the internet??

Again, thank you for your time and patience!!

On Aug 11, 8:16 am, Harry <silver.planet....@gmail.com> wrote:
> Thanks a lot Dimitry for your reply, is the above property guaranteed
> to remain unique in all cases..... if the mail item has been moved,
> copied etc?

> Thank you!

> On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
> wrote:
>
> > PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> > You can access it through MailItem.PropertyAccessor in Outlook 2007.

>
> > > > Dmitry Streblechenko (MVP)
> >

> >

> > -"Harry" <silver.planet....@gmail.com> wrote in message

>
> >news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...

>
> > > Hi,
> > > This is a developer q's.....currently when an email comes in the user
> > > imports it to our local database. Now, if the same email is received
> > > by three different people......how do i notify the others if one of
> > > them has already stored the email....?

>
> > > Is ther a unique email id property that i can use?

>
> > > Thanks!
 
Exchange 2003 creates it for internal emails also.

"Dmitry Streblechenko" <dmitry@dimastr.com> wrote in message

news:ulVY3d3GKHA.2516@TK2MSFTNGP02.phx.gbl...
> Exchange 2007 always creates that property. Not sure about Exchange 2003.

> > Dmitry Streblechenko (MVP)
>

>

>
 
For mails in "Sent Items", this property does not seem to be present when

viewed using OutlookSpy.

I'm currently testing on Exchange 2007 with Outlook 2007. Outlook's

Send/Receive "Send immediately when connected" checkbox is enabled.

Is there any setting on Exchange 2007 that needs to be enabled to make it

set this property accordingly?

From this KB article: http://support.microsoft.com/kb/924213

It seems that this property exists for Sent Items with Exchange 2003, with

some caveats.

"Dmitry Streblechenko" wrote:


> The property should stay unchanged.

> > Dmitry Streblechenko (MVP)
>

>

>

> -
> "Harry" <silver.planet.inc@gmail.com> wrote in message
> news:afbd6640-f1a3-4c61-a008-fd82e2b95b77@f33g2000vbm.googlegroups.com...
> Thanks a lot Dimitry for your reply, is the above property guaranteed
> to remain unique in all cases..... if the mail item has been moved,
> copied etc?

> Thank you!

> On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
> wrote:
> > PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> > You can access it through MailItem.PropertyAccessor in Outlook 2007.
> > > > Dmitry Streblechenko (MVP)
> >

> >

> > -"Harry" <silver.planet....@gmail.com> wrote in message
> > news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...
> >
> > > Hi,
> > > This is a developer q's.....currently when an email comes in the user
> > > imports it to our local database. Now, if the same email is received
> > > by three different people......how do i notify the others if one of
> > > them has already stored the email....?

> >
> > > Is ther a unique email id property that i can use?

> >
> > > Thanks!


>
 
Are you using a cached or online store?

Can you try to uncheck the "Use cached mode" checkbox in the Exchange

account properties dialog?

Dmitry Streblechenko (MVP)

-

"Jarrod" <Jarrod> wrote in message

news:B42FFCD4-089B-4964-9234-E14DD4AF90A7@microsoft.com...
> For mails in "Sent Items", this property does not seem to be present when
> viewed using OutlookSpy.

> I'm currently testing on Exchange 2007 with Outlook 2007. Outlook's
> Send/Receive "Send immediately when connected" checkbox is enabled.

> Is there any setting on Exchange 2007 that needs to be enabled to make it
> set this property accordingly?

> From this KB article: http://support.microsoft.com/kb/924213
> It seems that this property exists for Sent Items with Exchange 2003, with
> some caveats.

> "Dmitry Streblechenko" wrote:
>
> > The property should stay unchanged.
>

>> > > Dmitry Streblechenko (MVP)
> >

> >

> >

> > -
> > "Harry" <silver.planet.inc@gmail.com> wrote in message
> > news:afbd6640-f1a3-4c61-a008-fd82e2b95b77@f33g2000vbm.googlegroups.com...
> > Thanks a lot Dimitry for your reply, is the above property guaranteed
> > to remain unique in all cases..... if the mail item has been moved,
> > copied etc?
>

>
>> Thank you!
>

>> On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
>> wrote:
> > > PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> > > You can access it through MailItem.PropertyAccessor in Outlook 2007.
> >> > > > > Dmitry Streblechenko (MVP)
> > >

> > >

> > > -"Harry" <silver.planet....@gmail.com> wrote in message
> >> > news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...
> >> > > Hi,
> > > > This is a developer q's.....currently when an email comes in the user
> > > > imports it to our local database. Now, if the same email is received
> > > > by three different people......how do i notify the others if one of
> > > > them has already stored the email....?
> >> > > Is ther a unique email id property that i can use?
> >> > > Thanks!

>

>
>>
 
Ah... I see, thanks.

Didn't realise there was a "Use Cached Exchange Mode" option.

Btw, looks like cached mode is the default for Exchange deployments? Can a

organisation actually lockdown this option to non-cached so that this

technique of uniquely identifying emails upon sending becomes feasible?

"Dmitry Streblechenko" wrote:


> Are you using a cached or online store?
> Can you try to uncheck the "Use cached mode" checkbox in the Exchange
> account properties dialog?

> > Dmitry Streblechenko (MVP)
>

>

>

> -
> "Jarrod" <Jarrod> wrote in message
> news:B42FFCD4-089B-4964-9234-E14DD4AF90A7@microsoft.com...
> > For mails in "Sent Items", this property does not seem to be present when
> > viewed using OutlookSpy.
> > I'm currently testing on Exchange 2007 with Outlook 2007. Outlook's
> > Send/Receive "Send immediately when connected" checkbox is enabled.
> > Is there any setting on Exchange 2007 that needs to be enabled to make it
> > set this property accordingly?
> > From this KB article: http://support.microsoft.com/kb/924213
> > It seems that this property exists for Sent Items with Exchange 2003, with
> > some caveats.
> > "Dmitry Streblechenko" wrote:
> >
> >> The property should stay unchanged.
> >
> >> > >> Dmitry Streblechenko (MVP)
> >>

> >>

> >>

> >> -
> >> "Harry" <silver.planet.inc@gmail.com> wrote in message
> >> news:afbd6640-f1a3-4c61-a008-fd82e2b95b77@f33g2000vbm.googlegroups.com...
> >> Thanks a lot Dimitry for your reply, is the above property guaranteed
> >> to remain unique in all cases..... if the mail item has been moved,
> >> copied etc?
> >
> >
> >> Thank you!
> >
> >> On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
> >> wrote:
> >> > PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> >> > You can access it through MailItem.PropertyAccessor in Outlook 2007.
> >> >> > > >> > Dmitry Streblechenko (MVP)
> >> >

> >> >

> >> > -"Harry" <silver.planet....@gmail.com> wrote in message
> >> >> > news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...
> >> >> > > Hi,
> >> > > This is a developer q's.....currently when an email comes in the user
> >> > > imports it to our local database. Now, if the same email is received
> >> > > by three different people......how do i notify the others if one of
> >> > > them has already stored the email....?
> >> >> > > Is ther a unique email id property that i can use?
> >> >> > > Thanks!
> >
> >
> >>


>
 
That woudl be an overkill. Why not try to retrieve that property, an if it

is not available, reopen the message in the online mode:

http://support.microsoft.com/kb/834496

Dmitry Streblechenko (MVP)

-

"Jarrod" <Jarrod> wrote in message

news:4DA044A6-A53E-45D8-AD39-B20ABC40D085@microsoft.com...
> Ah... I see, thanks.

> Didn't realise there was a "Use Cached Exchange Mode" option.

> Btw, looks like cached mode is the default for Exchange deployments? Can
> a
> organisation actually lockdown this option to non-cached so that this
> technique of uniquely identifying emails upon sending becomes feasible?

> "Dmitry Streblechenko" wrote:
>
> > Are you using a cached or online store?
> > Can you try to uncheck the "Use cached mode" checkbox in the Exchange
> > account properties dialog?
>

>> > > Dmitry Streblechenko (MVP)
> >

> >

> >

> > -
> > "Jarrod" <Jarrod> wrote in message
> > news:B42FFCD4-089B-4964-9234-E14DD4AF90A7@microsoft.com...
> > > For mails in "Sent Items", this property does not seem to be present
> > > when
> > > viewed using OutlookSpy.
> >> > I'm currently testing on Exchange 2007 with Outlook 2007. Outlook's
> > > Send/Receive "Send immediately when connected" checkbox is enabled.
> >> > Is there any setting on Exchange 2007 that needs to be enabled to make
> > > it
> > > set this property accordingly?
> >> > From this KB article: http://support.microsoft.com/kb/924213
> > > It seems that this property exists for Sent Items with Exchange 2003,
> > > with
> > > some caveats.
> >> > "Dmitry Streblechenko" wrote:
> >> >> The property should stay unchanged.
> > >
>> >> > > >> Dmitry Streblechenko (MVP)
> > >>

> > >>

> > >>

> > >> -
> > >> "Harry" <silver.planet.inc@gmail.com> wrote in message
> > >> news:afbd6640-f1a3-4c61-a008-fd82e2b95b77@f33g2000vbm.googlegroups.com...
> > >> Thanks a lot Dimitry for your reply, is the above property guaranteed
> > >> to remain unique in all cases..... if the mail item has been moved,
> > >> copied etc?
> > >
>> >
>> >> Thank you!
> > >
>> >> On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
>> >> wrote:
> > >> > PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> > >> > You can access it through MailItem.PropertyAccessor in Outlook 2007.
> > >>> >> > > > >> > Dmitry Streblechenko (MVP)
> > >> >

> > >> >

> > >> > -"Harry" <silver.planet....@gmail.com> wrote in message
> > >>> >> > news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...
> > >>> >> > > Hi,
> > >> > > This is a developer q's.....currently when an email comes in the
> > >> > > user
> > >> > > imports it to our local database. Now, if the same email is
> > >> > > received
> > >> > > by three different people......how do i notify the others if one
> > >> > > of
> > >> > > them has already stored the email....?
> > >>> >> > > Is ther a unique email id property that i can use?
> > >>> >> > > Thanks!
> > >
>> >
>> >>

>

>
>>
 
Hmm, good KB article, thanks.

However, based on scenario 4 in this KB article:

http://support.microsoft.com/default.aspx/kb/924213

It seems to indicate that the retrieved message id using this method would

be different from the actual mail that was already sent out while in cached

mode?

"Dmitry Streblechenko" wrote:


> That woudl be an overkill. Why not try to retrieve that property, an if it
> is not available, reopen the message in the online mode:
> http://support.microsoft.com/kb/834496

> > Dmitry Streblechenko (MVP)
>

>

>

> -
> "Jarrod" <Jarrod> wrote in message
> news:4DA044A6-A53E-45D8-AD39-B20ABC40D085@microsoft.com...
> > Ah... I see, thanks.
> > Didn't realise there was a "Use Cached Exchange Mode" option.
> > Btw, looks like cached mode is the default for Exchange deployments? Can
> > a
> > organisation actually lockdown this option to non-cached so that this
> > technique of uniquely identifying emails upon sending becomes feasible?
> > "Dmitry Streblechenko" wrote:
> >
> >> Are you using a cached or online store?
> >> Can you try to uncheck the "Use cached mode" checkbox in the Exchange
> >> account properties dialog?
> >
> >> > >> Dmitry Streblechenko (MVP)
> >>

> >>

> >>

> >> -
> >> "Jarrod" <Jarrod> wrote in message
> >> news:B42FFCD4-089B-4964-9234-E14DD4AF90A7@microsoft.com...
> >> > For mails in "Sent Items", this property does not seem to be present
> >> > when
> >> > viewed using OutlookSpy.
> >> >> > I'm currently testing on Exchange 2007 with Outlook 2007. Outlook's
> >> > Send/Receive "Send immediately when connected" checkbox is enabled.
> >> >> > Is there any setting on Exchange 2007 that needs to be enabled to make
> >> > it
> >> > set this property accordingly?
> >> >> > From this KB article: http://support.microsoft.com/kb/924213
> >> > It seems that this property exists for Sent Items with Exchange 2003,
> >> > with
> >> > some caveats.
> >> >> > "Dmitry Streblechenko" wrote:
> >> >> >> The property should stay unchanged.
> >> >
> >> >> > >> >> Dmitry Streblechenko (MVP)
> >> >>

> >> >>

> >> >>

> >> >> -
> >> >> "Harry" <silver.planet.inc@gmail.com> wrote in message
> >> >> news:afbd6640-f1a3-4c61-a008-fd82e2b95b77@f33g2000vbm.googlegroups.com...
> >> >> Thanks a lot Dimitry for your reply, is the above property guaranteed
> >> >> to remain unique in all cases..... if the mail item has been moved,
> >> >> copied etc?
> >> >
> >> >
> >> >> Thank you!
> >> >
> >> >> On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
> >> >> wrote:
> >> >> > PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> >> >> > You can access it through MailItem.PropertyAccessor in Outlook 2007.
> >> >> >> >> > > >> >> > Dmitry Streblechenko (MVP)
> >> >> >

> >> >> >

> >> >> > -"Harry" <silver.planet....@gmail.com> wrote in message
> >> >> >> >> > news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...
> >> >> >> >> > > Hi,
> >> >> > > This is a developer q's.....currently when an email comes in the
> >> >> > > user
> >> >> > > imports it to our local database. Now, if the same email is
> >> >> > > received
> >> >> > > by three different people......how do i notify the others if one
> >> >> > > of
> >> >> > > them has already stored the email....?
> >> >> >> >> > > Is ther a unique email id property that i can use?
> >> >> >> >> > > Thanks!
> >> >
> >> >
> >> >
> >
> >
> >>


>
 
But you are trying to solve scenario (3).

If PR_INTERNET_MESSAGE_ID property is already present, you would not need to

open the message in the online mode to begin with.

Dmitry Streblechenko (MVP)

-

"Jarrod" <Jarrod> wrote in message

news:5F4171AA-AC6A-40DF-80EC-80CF272BD192@microsoft.com...
> Hmm, good KB article, thanks.

> However, based on scenario 4 in this KB article:
> http://support.microsoft.com/default.aspx/kb/924213

> It seems to indicate that the retrieved message id using this method would
> be different from the actual mail that was already sent out while in
> cached
> mode?

> "Dmitry Streblechenko" wrote:
>
> > That woudl be an overkill. Why not try to retrieve that property, an if
> > it
> > is not available, reopen the message in the online mode:
> > http://support.microsoft.com/kb/834496
>

>> > > Dmitry Streblechenko (MVP)
> >

> >

> >

> > -
> > "Jarrod" <Jarrod> wrote in message
> > news:4DA044A6-A53E-45D8-AD39-B20ABC40D085@microsoft.com...
> > > Ah... I see, thanks.
> >> > Didn't realise there was a "Use Cached Exchange Mode" option.
> >> > Btw, looks like cached mode is the default for Exchange deployments?
> > > Can
> > > a
> > > organisation actually lockdown this option to non-cached so that this
> > > technique of uniquely identifying emails upon sending becomes feasible?
> >> > "Dmitry Streblechenko" wrote:
> >> >> Are you using a cached or online store?
> > >> Can you try to uncheck the "Use cached mode" checkbox in the Exchange
> > >> account properties dialog?
> > >
>> >> > > >> Dmitry Streblechenko (MVP)
> > >>

> > >>

> > >>

> > >> -
> > >> "Jarrod" <Jarrod> wrote in message
> > >> news:B42FFCD4-089B-4964-9234-E14DD4AF90A7@microsoft.com...
> > >> > For mails in "Sent Items", this property does not seem to be present
> > >> > when
> > >> > viewed using OutlookSpy.
> > >>> >> > I'm currently testing on Exchange 2007 with Outlook 2007. Outlook's
> > >> > Send/Receive "Send immediately when connected" checkbox is enabled.
> > >>> >> > Is there any setting on Exchange 2007 that needs to be enabled to
> > >> > make
> > >> > it
> > >> > set this property accordingly?
> > >>> >> > From this KB article: http://support.microsoft.com/kb/924213
> > >> > It seems that this property exists for Sent Items with Exchange
> > >> > 2003,
> > >> > with
> > >> > some caveats.
> > >>> >> > "Dmitry Streblechenko" wrote:
> > >>> >> >> The property should stay unchanged.
> > >> >
>> >> >> > > >> >> Dmitry Streblechenko (MVP)
> > >> >>

> > >> >>

> > >> >>

> > >> >> -
> > >> >> "Harry" <silver.planet.inc@gmail.com> wrote in message
> > >> >> news:afbd6640-f1a3-4c61-a008-fd82e2b95b77@f33g2000vbm.googlegroups.com...
> > >> >> Thanks a lot Dimitry for your reply, is the above property
> > >> >> guaranteed
> > >> >> to remain unique in all cases..... if the mail item has been moved,
> > >> >> copied etc?
> > >> >
>> >> >
>> >> >> Thank you!
> > >> >
>> >> >> On Aug 10, 11:29 pm, "Dmitry Streblechenko" <dmi...@dimastr.com
>> >> >> wrote:
> > >> >> > PR_INTERNET_MESSAGE_ID MAPI property shoudl do the trick.
> > >> >> > You can access it through MailItem.PropertyAccessor in Outlook
> > >> >> > 2007.
> > >> >>> >> >> > > > >> >> > Dmitry Streblechenko (MVP)
> > >> >> >

> > >> >> >

> > >> >> > -"Harry" <silver.planet....@gmail.com> wrote in message
> > >> >>> >> >> > news:a5168f59-5c44-401e-a111-6772841e1693@n11g2000yqb.googlegroups.com...
> > >> >>> >> >> > > Hi,
> > >> >> > > This is a developer q's.....currently when an email comes in
> > >> >> > > the
> > >> >> > > user
> > >> >> > > imports it to our local database. Now, if the same email is
> > >> >> > > received
> > >> >> > > by three different people......how do i notify the others if
> > >> >> > > one
> > >> >> > > of
> > >> >> > > them has already stored the email....?
> > >> >>> >> >> > > Is ther a unique email id property that i can use?
> > >> >>> >> >> > > Thanks!
> > >> >
>> >> >
>> >> >
>> >
>> >
>> >>

>

>
>>
 
Status
Not open for further replies.
Similar threads
Thread starter Title Forum Replies Date
Z assign unique number email Using Outlook 8
J Grouping email subjects by unique indentifier Using Outlook 1
U Export of Message Header / Unique ID to Excel Sheet When email is Outlook VBA and Custom Forms 1
P Email address auto-completes work fine on laptop, but no longer on desktop Using Outlook 2
S Create Outlook Task from Template and append Body with Email Body Outlook VBA and Custom Forms 4
H Copying email address(es) in body of email and pasting in To field Outlook VBA and Custom Forms 1
A Search folder and move the email Outlook VBA and Custom Forms 0
P VBA to add email address to Outlook 365 rule Outlook VBA and Custom Forms 0
farrissf Outlook 2016 Optimizing Email Searches in Outlook 2016: Seeking Insights on Quick Search vs Advanced Search Features Using Outlook 0
D Delete selected text in outgoing email body Outlook VBA and Custom Forms 0
F Graphics in email / Mac recipient garbled Using Outlook 0
D Outlook VBA forward the selected email to the original sender’s email ID (including the email used in TO, CC Field) from the email chain Outlook VBA and Custom Forms 2
Witzker Outlook 2019 Macro to seach in all contact Folders for marked Email Adress Outlook VBA and Custom Forms 1
E Outlook 365 Save Selected Email Message as .msg File - oMail.Delete not working when SEARCH Outlook VBA and Custom Forms 0
S Email Macros to go to a SHARED Outlook mailbox Draft folder...NOT my personal Outlook Draft folder Using Outlook 2
R Outlook 365 VBA AUTO SEND WITH DELAY FOR EACH EMAIL Outlook VBA and Custom Forms 0
G Print email attachments when hit subfolder Outlook VBA and Custom Forms 1
C Spam Email? Using Outlook 2
G Automatically delete email when a condition is met Outlook VBA and Custom Forms 1
E Save Selected Email Message as .msg File - digitally sign email doesn't works Outlook VBA and Custom Forms 1
S Email was migrated from GoDaddy to Microsoft exchange. We lost IMAP ability Exchange Server Administration 1
R Outlook 365 How to integrate a third-party app with Outlook to track email and sms? Using Outlook 2
S Paperclip icon shows without attachment in email under Sent folder Using Outlook 0
B Outlook 2019 Automatically move email after assigning category Using Outlook 4
Rupert Dragwater How to permanently remove an email address Using Outlook 9
K vba code to auto download email into a specific folder in local hard disk as and when any new email arrives in Inbox/subfolder Outlook VBA and Custom Forms 0
F Auto changing email subject line in bulk Using Outlook 2
F Want to add second email to Outlook for business use Using Outlook 4
kburrows Outlook Email Body Text Disappears/Overlaps, Folders Switch Around when You Hover, Excel Opens Randomly and Runs in the Background - Profile Corrupt? Using Outlook 0
J Outlook 365 Outlook Macro to Sort emails by column "Received" to view the latest email received Outlook VBA and Custom Forms 0
A Outlook 2019 Help with forwarding email without mentioning the previous email sender. Outlook VBA and Custom Forms 0
J Macro to send email as alias Outlook VBA and Custom Forms 0
M Shift Delete doesn't delete email from server Using Outlook 3
K Incorporate selection from combobox into body of email Outlook VBA and Custom Forms 0
L Why are some email automatically going to "archive" Using Outlook 2
M Outlook Macro to save as Email with a file name format : Date_Timestamp_Sender initial_Email subject Outlook VBA and Custom Forms 0
B Outlook 2019 Custom Email form - Edit default email form Outlook VBA and Custom Forms 6
F Add a category before "Send an Email When You Add an Appointment to Your Calendar" Outlook VBA and Custom Forms 0
T Problem when requesting to view an email in a browser Using Outlook 0
J Outlook 365 Forward Email Subject to my inbox when new email arrive in shared inbox Using Outlook 0
HarvMan Archive Email Manually Using Outlook 1
L Fetch, edit and forward an email with VBA outlook Outlook VBA and Custom Forms 2
S New Email "From" box stopped working Using Outlook 0
Rupert Dragwater Duplicate email in Folder Using Outlook 7
M "Attachment Detacher for Outlook" add in, does it update the server copy of the email? Using Outlook 1
W Outlook 365 I am getting the "Either there is no default mail client" error when I try to send an email on excel Office 365 Using Outlook 1
MattC Changing the font of an email with VBA Outlook VBA and Custom Forms 1
L Specific Incoming Email Address Immediately Deleted Using Outlook 2
Witzker Outlook 2019 Macro to send an Email Template from User Defined Contact Form Outlook VBA and Custom Forms 0
Witzker Outlook 2019 Edit contact from email does not open the user defined contactform Using Outlook 3

Similar threads

Back
Top