Blank Email in Reading Pane for Custom Form

Status
Not open for further replies.
T

TlY

I have developed and published a Custom message type Outlook Form, there is

no issue with the form data retention, but when the Outlook form is sent and

reaches the inbox of the recipient, in the Reading Pane (Preview) of Outlook,

the form elements are not visible (i.e. looks blank) and when double clicked

the form and its data appears in a new window.

Is there a parameter setting that I am missing here to make the form and

data elements visible in the Reading Pane (Preview) area of Outlook.
 
Are you sending the form definition with the item? That would one-off the

item and because it's a custom form item prevent it from being displayed in

the preview pane.

"NV" <NV> wrote in message

news:B9CD5C73-B029-48E4-8CC8-80CA3C63D0C7@microsoft.com...
> I have developed and published a Custom message type Outlook Form, there is
> no issue with the form data retention, but when the Outlook form is sent
> and
> reaches the inbox of the recipient, in the Reading Pane (Preview) of
> Outlook,
> the form elements are not visible (i.e. looks blank) and when double
> clicked
> the form and its data appears in a new window.

> Is there a parameter setting that I am missing here to make the form and
> data elements visible in the Reading Pane (Preview) area of Outlook.
>
 
That's completely normal. Creating a custom form doesn't affect the look of

the reading pane. Modifying the reading pane is done in Outlook 2007 with a

form region, which is a completely different form technology implemented

with an add-in, not a published form.

Sue Mosher

"NV" <NV> wrote in message

news:B9CD5C73-B029-48E4-8CC8-80CA3C63D0C7@microsoft.com...
> I have developed and published a Custom message type Outlook Form, there is
> no issue with the form data retention, but when the Outlook form is sent
> and
> reaches the inbox of the recipient, in the Reading Pane (Preview) of
> Outlook,
> the form elements are not visible (i.e. looks blank) and when double
> clicked
> the form and its data appears in a new window.

> Is there a parameter setting that I am missing here to make the form and
> data elements visible in the Reading Pane (Preview) area of Outlook.
 
The Send Form Definition option has not been checked. The issue is that the

form and its contents are not displayed in the readint pane (preview) of the

recipient.

They are only visible if the recipient double clicks on the email and opens

it in a separate window.
wrote:


> Are you sending the form definition with the item? That would one-off the
> item and because it's a custom form item prevent it from being displayed in
> the preview pane.

> >

>

> "NV" <NV> wrote in message
> news:B9CD5C73-B029-48E4-8CC8-80CA3C63D0C7@microsoft.com...
> >I have developed and published a Custom message type Outlook Form, there is
> > no issue with the form data retention, but when the Outlook form is sent
> > and
> > reaches the inbox of the recipient, in the Reading Pane (Preview) of
> > Outlook,
> > the form elements are not visible (i.e. looks blank) and when double
> > clicked
> > the form and its data appears in a new window.
> > Is there a parameter setting that I am missing here to make the form and
> > data elements visible in the Reading Pane (Preview) area of Outlook.
> >


>
 
The form has been developed on MS Outlook 2003

"Sue Mosher [MVP]" wrote:


> That's completely normal. Creating a custom form doesn't affect the look of
> the reading pane. Modifying the reading pane is done in Outlook 2007 with a
> form region, which is a completely different form technology implemented
> with an add-in, not a published form.

> > Sue Mosher
> > >

> "NV" <NV> wrote in message
> news:B9CD5C73-B029-48E4-8CC8-80CA3C63D0C7@microsoft.com...
> >I have developed and published a Custom message type Outlook Form, there is
> > no issue with the form data retention, but when the Outlook form is sent
> > and
> > reaches the inbox of the recipient, in the Reading Pane (Preview) of
> > Outlook,
> > the form elements are not visible (i.e. looks blank) and when double
> > clicked
> > the form and its data appears in a new window.
> > Is there a parameter setting that I am missing here to make the form and
> > data elements visible in the Reading Pane (Preview) area of Outlook.


>
 
It's still completely normal behavior. Outlook 2003 has no means for

displaying custom form content in the reading pane. Outlook 2007 is the

first version with the form region feature.

Sue Mosher

"NV" <NV> wrote in message

news:C8E5BB39-7423-4EA3-9B18-086CD1F79231@microsoft.com...
> The form has been developed on MS Outlook 2003

> "Sue Mosher [MVP]" wrote:
>
> > That's completely normal. Creating a custom form doesn't affect the look
> > of
> > the reading pane. Modifying the reading pane is done in Outlook 2007 with
> > a
> > form region, which is a completely different form technology implemented
> > with an add-in, not a published form.
>

>> "NV" <NV> wrote in message
> > news:B9CD5C73-B029-48E4-8CC8-80CA3C63D0C7@microsoft.com...
> > >I have developed and published a Custom message type Outlook Form, there
> > >is
> > > no issue with the form data retention, but when the Outlook form is
> > > sent
> > > and
> > > reaches the inbox of the recipient, in the Reading Pane (Preview) of
> > > Outlook,
> > > the form elements are not visible (i.e. looks blank) and when double
> > > clicked
> > > the form and its data appears in a new window.
> >> > Is there a parameter setting that I am missing here to make the form
> > > and
> > > data elements visible in the Reading Pane (Preview) area of Outlook.

>

>
>>
 
If this is a custom form that's normal and expected behavior. No custom form

can display in the preview pane, although Outlook 2007 can display form

regions in the preview.

"NV" <NV> wrote in message

news:7A82C1AF-583B-4C45-BC58-A66EAAB2534D@microsoft.com...
> The Send Form Definition option has not been checked. The issue is that
> the
> form and its contents are not displayed in the readint pane (preview) of
> the
> recipient.

> They are only visible if the recipient double clicks on the email and
> opens
> it in a separate window.
 
One more question...

The functionality about the reading pane is OK, but when a recipient hits

Reply or Reply All, the form and its data is again not visible, but is when

the recipient hits Forward...

Is it a similar functionality / limitation as to how attachments work in

Reply / Reply All as compared to Forward.

"NV" wrote:


> I have developed and published a Custom message type Outlook Form, there is
> no issue with the form data retention, but when the Outlook form is sent and
> reaches the inbox of the recipient, in the Reading Pane (Preview) of Outlook,
> the form elements are not visible (i.e. looks blank) and when double clicked
> the form and its data appears in a new window.

> Is there a parameter setting that I am missing here to make the form and
> data elements visible in the Reading Pane (Preview) area of Outlook.
 
Thanks Ken
wrote:


> If this is a custom form that's normal and expected behavior. No custom form
> can display in the preview pane, although Outlook 2007 can display form
> regions in the preview.

> >

>

> "NV" <NV> wrote in message
> news:7A82C1AF-583B-4C45-BC58-A66EAAB2534D@microsoft.com...
> > The Send Form Definition option has not been checked. The issue is that
> > the
> > form and its contents are not displayed in the readint pane (preview) of
> > the
> > recipient.
> > They are only visible if the recipient double clicks on the email and
> > opens
> > it in a separate window.


>
 
Thanks Sue

"Sue Mosher [MVP]" wrote:


> It's still completely normal behavior. Outlook 2003 has no means for
> displaying custom form content in the reading pane. Outlook 2007 is the
> first version with the form region feature.

> > Sue Mosher
> > >

> "NV" <NV> wrote in message
> news:C8E5BB39-7423-4EA3-9B18-086CD1F79231@microsoft.com...
> > The form has been developed on MS Outlook 2003
> > "Sue Mosher [MVP]" wrote:
> >
> >> That's completely normal. Creating a custom form doesn't affect the look
> >> of
> >> the reading pane. Modifying the reading pane is done in Outlook 2007 with
> >> a
> >> form region, which is a completely different form technology implemented
> >> with an add-in, not a published form.
> >
> >> "NV" <NV> wrote in message
> >> news:B9CD5C73-B029-48E4-8CC8-80CA3C63D0C7@microsoft.com...
> >> >I have developed and published a Custom message type Outlook Form, there
> >> >is
> >> > no issue with the form data retention, but when the Outlook form is
> >> > sent
> >> > and
> >> > reaches the inbox of the recipient, in the Reading Pane (Preview) of
> >> > Outlook,
> >> > the form elements are not visible (i.e. looks blank) and when double
> >> > clicked
> >> > the form and its data appears in a new window.
> >> >> > Is there a parameter setting that I am missing here to make the form
> >> > and
> >> > data elements visible in the Reading Pane (Preview) area of Outlook.
> >
> >
> >>


>
 
In the Actions tab of the form when in design mode is the forward action set

to use the custom form, and are the other actions set to use standard forms?

"NV" <NV> wrote in message

news:DD464C64-AAE5-4FD1-9281-0280FEFC3FEF@microsoft.com...
> One more question...
> The functionality about the reading pane is OK, but when a recipient hits
> Reply or Reply All, the form and its data is again not visible, but is
> when
> the recipient hits Forward...
> Is it a similar functionality / limitation as to how attachments work in
> Reply / Reply All as compared to Forward.
 
Under the Actions tab...

The Enabled = YES

Action Names = Reply, Reply To All, Forward, Reply to Folder

Creates form of type = Message, Message, Message, Post

Address form like = Reply, Reply to All, Forward, Reply to Folder

When responding = Respect user's default

Prefix = RE, RE, FW

Is there any setting that needs to change.... i am thinking...

Address form like.... should be Forward for Reply, Reply to All and Forward
wrote:


> In the Actions tab of the form when in design mode is the forward action set
> to use the custom form, and are the other actions set to use standard forms?

> >

>

> "NV" <NV> wrote in message
> news:DD464C64-AAE5-4FD1-9281-0280FEFC3FEF@microsoft.com...
> > One more question...
> > The functionality about the reading pane is OK, but when a recipient hits
> > Reply or Reply All, the form and its data is again not visible, but is
> > when
> > the recipient hits Forward...
> > Is it a similar functionality / limitation as to how attachments work in
> > Reply / Reply All as compared to Forward.


>
 
The Forward action must be set to use the published custom form unless you

want to risk getting one-offs whose data can't be read.

The Reply* actions can also be set to use the published form, but you may

also need to add code to the Reply and ReplyAll actions to copy data between

the custom fields on the original item and the reply.

Sue Mosher

"NV" <NV> wrote in message

news:7801D20E-1A51-4FE4-B9A4-6F9E8E98955A@microsoft.com...
> Under the Actions tab...
> The Enabled = YES
> Action Names = Reply, Reply To All, Forward, Reply to Folder
> Creates form of type = Message, Message, Message, Post
> Address form like = Reply, Reply to All, Forward, Reply to Folder
> When responding = Respect user's default
> Prefix = RE, RE, FW
> Is there any setting that needs to change.... i am thinking...
> Address form like.... should be Forward for Reply, Reply to All and
> Forward

> " - " wrote:
>
> > In the Actions tab of the form when in design mode is the forward action
> > set
> > to use the custom form, and are the other actions set to use standard
> > forms?
>

>> "NV" <NV> wrote in message
> > news:DD464C64-AAE5-4FD1-9281-0280FEFC3FEF@microsoft.com...
> > > One more question...
> > > The functionality about the reading pane is OK, but when a recipient
> > > hits
> > > Reply or Reply All, the form and its data is again not visible, but is
> > > when
> > > the recipient hits Forward...
> > > Is it a similar functionality / limitation as to how attachments work
> > > in
> > > Reply / Reply All as compared to Forward.

>

>>
 
Status
Not open for further replies.
Similar threads
Thread starter Title Forum Replies Date
M Receipients are receiving a blank email when I send a form Using Outlook 1
C Prevent Outlook from sending an email with a blank Subject Line Outlook VBA and Custom Forms 3
J Recurrence pattern blank on recurring meetings? Using Outlook 4
D Emailed form is blank Outlook VBA and Custom Forms 0
David Michaels Contact card shows blank Outlook 2013 Outlook VBA and Custom Forms 0
J Installed Outlook but Default Calendar is Blank Using Outlook 3
A Outlook Postal Addresses Missing/Blank Using Outlook 0
J Blank GAL in OAB Exchange Server Administration 1
M Blank Pop-up Window when click "Manage Sharing" BCM (Business Contact Manager) 1
R How to search for blank userproperties field Outlook VBA and Custom Forms 4
Copwriter Paragraph formatting in blank messages/stationery Using Outlook 3
J Meeting Invites Go Blank When Forwarding or Accepting Using Outlook 2
J Calendar Views (2013) are Blank Using Outlook 1
T From Field Blank when saving to folder other than Sent items Using Outlook 2
K blank emails generated in outbox when clicking on Inbox and other foders Using Outlook 0
A VBA Script to Forward Spam to AntiSpam Provider Using "Blank" Form Outlook VBA and Custom Forms 2
F Change default value of date/time type from "None" to Blank Using Outlook 1
G Outlook Forms Blank once sent. Using Outlook 1
K Custom Forms - Blank Message Received! Using Outlook 1
M outlook items attached show up blank Using Outlook 3
E Blank Print Preview when access via the Quick Access toolbar Using Outlook 3
S Blank body when replying with an Outlook Form. Using Outlook 21
M Outlook 2003 rule to detect a blank category Using Outlook 1
J Blank Inboxes in Outlook 2010 Using Outlook 3
C adobe attachments open with blank screen Using Outlook 3
M Missing/Blank Hotmail Emails from Outlook but appear in hotmail BCM (Business Contact Manager) 1
B Re: Outlook Forms E-mail Creation Sending Blank Fields Outlook VBA and Custom Forms 1
Forum Admin Blank messages in Outlook when using the Connector Using Outlook.com accounts in Outlook 0
B Blank E-mail in Sent Folder Using Outlook 4
B Attachment.PathName is always blank Outlook VBA and Custom Forms 7
L Outlook 2007 prints blank page Using Outlook 4
B Fields are blank for recipient Outlook VBA and Custom Forms 4
C Re: Outlook 2007 is showing all pictures as a blank square Using Outlook 2
Y I receive a blank sheet in microsoft outlook forms when Outlook VBA and Custom Forms 1
P Email address auto-completes work fine on laptop, but no longer on desktop Using Outlook 2
S Create Outlook Task from Template and append Body with Email Body Outlook VBA and Custom Forms 4
H Copying email address(es) in body of email and pasting in To field Outlook VBA and Custom Forms 1
A Search folder and move the email Outlook VBA and Custom Forms 0
P VBA to add email address to Outlook 365 rule Outlook VBA and Custom Forms 0
farrissf Outlook 2016 Optimizing Email Searches in Outlook 2016: Seeking Insights on Quick Search vs Advanced Search Features Using Outlook 0
D Delete selected text in outgoing email body Outlook VBA and Custom Forms 0
F Graphics in email / Mac recipient garbled Using Outlook 0
D Outlook VBA forward the selected email to the original sender’s email ID (including the email used in TO, CC Field) from the email chain Outlook VBA and Custom Forms 2
Witzker Outlook 2019 Macro to seach in all contact Folders for marked Email Adress Outlook VBA and Custom Forms 1
E Outlook 365 Save Selected Email Message as .msg File - oMail.Delete not working when SEARCH Outlook VBA and Custom Forms 0
S Email Macros to go to a SHARED Outlook mailbox Draft folder...NOT my personal Outlook Draft folder Using Outlook 2
R Outlook 365 VBA AUTO SEND WITH DELAY FOR EACH EMAIL Outlook VBA and Custom Forms 0
G Print email attachments when hit subfolder Outlook VBA and Custom Forms 1
C Spam Email? Using Outlook 2
G Automatically delete email when a condition is met Outlook VBA and Custom Forms 1

Similar threads

Back
Top