Word macro running from OL VBA throwing error on Word SaveAs??

Status
Not open for further replies.
E

Ed from AZ

I have a macro in Word that iterates through my Favorites folder and

saves everything out as hyperlinks in a Word doc. I then SaveAs using

doc.SaveAs FileName:= _

"C:\Documents and Settings\edward.millis\Documents\MyFaves.htm",

_

FileFormat:=wdFormatHTML

This macro was written in Word XP, which has now been upgraded to

2007. The OS has also been updated from WinXP Pro to Vista Pro.

When I run the macro in Word only, it runs fine - the file is

generated and saved to the correct folder in the correct format.

I want to email the file out, so I am trying to run it from within an

Outlook 2007 macro. (Security settings prevent Word VBA from

accessing OL VBA, or I would do it all from within Word.)

The OL macro creates the Word instance just fine and runs the macro

just fine - until it hits the SaveAs. I put a STOP in the Word code

just before the SaveAs to verify this - as soon aas I F8 to the

SaveAs, my error handler tells me that Outlook VBA has the following

error:

-2147417851

Method "Run" of object "Application" failed

Any suggestions on getting this macro to run when accessed from OL

VBA?

Ed
 
That file path shouldn't exist at all on a Vista system. Does the exact same

code really run in Word on Vista without errors? In any case, if there's a

Word error going on the problem isn't an Outlook problem but a Word problem.

"Ed from AZ" <prof_ofwhat@yahoo.com> wrote in message

news:6a026697-8927-4b89-a9c0-7d10588a014a@g28g2000yqh.googlegroups.com...
> I have a macro in Word that iterates through my Favorites folder and
> saves everything out as hyperlinks in a Word doc. I then SaveAs using
> doc.SaveAs FileName:= _
> "C:\Documents and Settings\edward.millis\Documents\MyFaves.htm",
> _
> FileFormat:=wdFormatHTML

> This macro was written in Word XP, which has now been upgraded to
> 2007. The OS has also been updated from WinXP Pro to Vista Pro.

> When I run the macro in Word only, it runs fine - the file is
> generated and saved to the correct folder in the correct format.

> I want to email the file out, so I am trying to run it from within an
> Outlook 2007 macro. (Security settings prevent Word VBA from
> accessing OL VBA, or I would do it all from within Word.)

> The OL macro creates the Word instance just fine and runs the macro
> just fine - until it hits the SaveAs. I put a STOP in the Word code
> just before the SaveAs to verify this - as soon aas I F8 to the
> SaveAs, my error handler tells me that Outlook VBA has the following
> error:
> -2147417851
> Method "Run" of object "Application" failed

> Any suggestions on getting this macro to run when accessed from OL
> VBA?
> Ed
 
> That file path shouldn't exist at all on a Vista system.

Wow! I copied it straight off the folder address bar - I thought.

The address bar shows the heirarchy separated by >, but when you click

in it it turns to /. I'll have to look at that again. But yes, when

run from Word, there are no problems. Well, maybe not - it's

overwriting a file that's already there, so maybe the newly save file

is disappearing into the system somewhere and I'm actually still

seeing the previous version.

Gotta look at that again! Thanks, Ken. At least I have a good point

to start looking.

Ed

On Mar 2, 1:54 pm, " - " <kenslo...@mvps.org
wrote:
> That file path shouldn't exist at all on a Vista system. Does the exact same
> code really run in Word on Vista without errors? In any case, if there's a
> Word error going on the problem isn't an Outlook problem but a Word problem.

> >

> http://www.slovaktech.com

> "Ed from AZ" <prof_ofw...@yahoo.com> wrote in messagenews:6a026697-8927-4b89-a9c0-7d10588a014a@g28g2000yqh.googlegroups.com...

>
> >I have a macro in Word that iterates through my Favorites folder and
> > saves everything out as hyperlinks in a Word doc.  I then SaveAs using
> >  doc.SaveAs FileName:= _
> >      "C:\Documents and Settings\edward.millis\Documents\MyFaves.htm",
> > _
> >      FileFormat:=wdFormatHTML

>
> > This macro was written in Word XP, which has now been upgraded to
> > 2007.  The OS has also been updated from WinXP Pro to Vista Pro.

>
> > When I run the macro in Word only, it runs fine - the file is
> > generated and saved to the correct folder in the correct format.

>
> > I want to email the file out, so I am trying to run it from within an
> > Outlook 2007 macro.  (Security settings prevent Word VBA from
> > accessing OL VBA, or I would do it all from within Word.)

>
> > The OL macro creates the Word instance just fine and runs the macro
> > just fine - until it hits the SaveAs.  I put a STOP in the Word code
> > just before the SaveAs to verify this - as soon aas I F8 to the
> > SaveAs, my error handler tells me that Outlook VBA has the following
> > error:
> >  -2147417851
> >  Method "Run" of object "Application" failed

>
> > Any suggestions on getting this macro to run when accessed from OL
> > VBA?
> > Ed-


 
I don't know, your setup may be different, but here on one of my Vista

setups a document in my Documents folder has a path that looks like this:

C:\Users\.000\Documents\9096xcc.doc.

"Ed from AZ" <prof_ofwhat@yahoo.com> wrote in message

news:3ec2eba3-fe84-41f1-80e1-8c9bd5898755@f17g2000prh.googlegroups.com...
> That file path shouldn't exist at all on a Vista system.


Wow! I copied it straight off the folder address bar - I thought.

The address bar shows the heirarchy separated by >, but when you click

in it it turns to /. I'll have to look at that again. But yes, when

run from Word, there are no problems. Well, maybe not - it's

overwriting a file that's already there, so maybe the newly save file

is disappearing into the system somewhere and I'm actually still

seeing the previous version.

Gotta look at that again! Thanks, Ken. At least I have a good point

to start looking.

Ed
 
Vista will allow you to use that name as an alternative to the

Users\(userid)\Documents name.

Are you using Application.Run (as per the message)? Or is the code exactly

as posted - which ought to work (assuming doc is a valid reference)?

Enjoy,

Tony

www.WordArticles.com
<kenslovak@mvps.org> wrote in message

news:%23O0vKqkuKHA.6140@TK2MSFTNGP05.phx.gbl...
> That file path shouldn't exist at all on a Vista system. Does the exact
> same code really run in Word on Vista without errors? In any case, if
> there's a Word error going on the problem isn't an Outlook problem but a
> Word problem.

> >

>

> "Ed from AZ" <prof_ofwhat@yahoo.com> wrote in message
> news:6a026697-8927-4b89-a9c0-7d10588a014a@g28g2000yqh.googlegroups.com...
> >I have a macro in Word that iterates through my Favorites folder and
> > saves everything out as hyperlinks in a Word doc. I then SaveAs using
> > doc.SaveAs FileName:= _
> > "C:\Documents and Settings\edward.millis\Documents\MyFaves.htm",
> > _
> > FileFormat:=wdFormatHTML
>

>> This macro was written in Word XP, which has now been upgraded to
> > 2007. The OS has also been updated from WinXP Pro to Vista Pro.
>

>> When I run the macro in Word only, it runs fine - the file is
> > generated and saved to the correct folder in the correct format.
>

>> I want to email the file out, so I am trying to run it from within an
> > Outlook 2007 macro. (Security settings prevent Word VBA from
> > accessing OL VBA, or I would do it all from within Word.)
>

>> The OL macro creates the Word instance just fine and runs the macro
> > just fine - until it hits the SaveAs. I put a STOP in the Word code
> > just before the SaveAs to verify this - as soon aas I F8 to the
> > SaveAs, my error handler tells me that Outlook VBA has the following
> > error:
> > -2147417851
> > Method "Run" of object "Application" failed
>

>> Any suggestions on getting this macro to run when accessed from OL
> > VBA?
> > Ed

>
 
Hi, Tony.

The Outlook macro has

'Set Word application to running instance or new instance

Set appWord = GetObject(, "Word.Application")

If Err Then

Set appWord = New Word.Application

WordWasNotRunning = True

End If

Err.Clear

On Error GoTo BadBoy

'Run Word macro

appWord.Visible = True

appWord.Run "Normal.Module11.GetMyFaves"

The Word macro does run. I put a Stop right before the SaveAs command

in the Word macro and fixed the file path for Vista. The macro breaks

at the Stop, and as soon as I F8 to the SaveAs line it throws the

error - not in the Word app, but in the OL app as described in my

first post.

I'm thinking the next step may be to put everything in OL VBA and just

access Word from there to create and save the doc. Just haven't had

time to play with that yet.

Ed

On Mar 8, 12:51 pm, "Tony Jollans" <My forename at my surname dot com
wrote:
> Vista will allow you to use that name as an alternative to the
> Users\(userid)\Documents name.

> Are you using Application.Run (as per the message)? Or is the code exactly
> as posted - which ought to work (assuming doc is a valid reference)?

> > Enjoy,
> Tony

>  www.WordArticles.com

> " - " <kenslo...@mvps.org> wrote in messagenews:%23O0vKqkuKHA.6140@TK2MSFTNGP05.phx.gbl...

>
> > That file path shouldn't exist at all on a Vista system. Does the exact
> > same code really run in Word on Vista without errors? In any case, if
> > there's a Word error going on the problem isn't an Outlook problem but a
> > Word problem.

>
> > > >

> >

> >

>
> > "Ed from AZ" <prof_ofw...@yahoo.com> wrote in message
> >news:6a026697-8927-4b89-a9c0-7d10588a014a@g28g2000yqh.googlegroups.com....
> >>I have a macro in Word that iterates through my Favorites folder and
> >> saves everything out as hyperlinks in a Word doc.  I then SaveAs using
> >>  doc.SaveAs FileName:= _
> >>      "C:\Documents and Settings\edward.millis\Documents\MyFaves.htm",
> >> _
> >>      FileFormat:=wdFormatHTML

>
> >> This macro was written in Word XP, which has now been upgraded to
> >> 2007.  The OS has also been updated from WinXP Pro to Vista Pro.

>
> >> When I run the macro in Word only, it runs fine - the file is
> >> generated and saved to the correct folder in the correct format.

>
> >> I want to email the file out, so I am trying to run it from within an
> >> Outlook 2007 macro.  (Security settings prevent Word VBA from
> >> accessing OL VBA, or I would do it all from within Word.)

>
> >> The OL macro creates the Word instance just fine and runs the macro
> >> just fine - until it hits the SaveAs.  I put a STOP in the Word code
> >> just before the SaveAs to verify this - as soon aas I F8 to the
> >> SaveAs, my error handler tells me that Outlook VBA has the following
> >> error:
> >>  -2147417851
> >>  Method "Run" of object "Application" failed

>
> >> Any suggestions on getting this macro to run when accessed from OL
> >> VBA?
> >> Ed-


 
The error is in Outlook because .. you don't have any active error trapping,

and the error bubbles up to the top and is trapped, ultimately, by the top

level VBA in Outlook. If you add an On Error to your Word macro, it should

trap the error there.

That, however, doesn't help with the actual issue - error code -2147417851

is a rather generic 'server exception' - these can be symptomatic of object

errors - lost pointers, or implicit instantiation, for example - that can

happen in Automation. Can you post the full Word code as well?

Enjoy,

Tony

www.WordArticles.com

"Ed from AZ" <prof_ofwhat@yahoo.com> wrote in message

news:6d689010-df81-4c34-8d78-76d6aa87c20d@g26g2000yqn.googlegroups.com...

Hi, Tony.

The Outlook macro has

'Set Word application to running instance or new instance

Set appWord = GetObject(, "Word.Application")

If Err Then

Set appWord = New Word.Application

WordWasNotRunning = True

End If

Err.Clear

On Error GoTo BadBoy

'Run Word macro

appWord.Visible = True

appWord.Run "Normal.Module11.GetMyFaves"

The Word macro does run. I put a Stop right before the SaveAs command

in the Word macro and fixed the file path for Vista. The macro breaks

at the Stop, and as soon as I F8 to the SaveAs line it throws the

error - not in the Word app, but in the OL app as described in my

first post.

I'm thinking the next step may be to put everything in OL VBA and just

access Word from there to create and save the doc. Just haven't had

time to play with that yet.

Ed

On Mar 8, 12:51 pm, "Tony Jollans" <My forename at my surname dot com
wrote:
> Vista will allow you to use that name as an alternative to the
> Users\(userid)\Documents name.

> Are you using Application.Run (as per the message)? Or is the code exactly
> as posted - which ought to work (assuming doc is a valid reference)?

> > Enjoy,
> Tony

> www.WordArticles.com

> " - " <kenslo...@mvps.org> wrote in
> messagenews:%23O0vKqkuKHA.6140@TK2MSFTNGP05.phx.gbl...

>
> > That file path shouldn't exist at all on a Vista system. Does the exact
> > same code really run in Word on Vista without errors? In any case, if
> > there's a Word error going on the problem isn't an Outlook problem but a
> > Word problem.

>
> > > >

> >

> >

>
> > "Ed from AZ" <prof_ofw...@yahoo.com> wrote in message
> >news:6a026697-8927-4b89-a9c0-7d10588a014a@g28g2000yqh.googlegroups.com...
> >>I have a macro in Word that iterates through my Favorites folder and
> >> saves everything out as hyperlinks in a Word doc. I then SaveAs using
> >> doc.SaveAs FileName:= _
> >> "C:\Documents and Settings\edward.millis\Documents\MyFaves.htm",
> >> _
> >> FileFormat:=wdFormatHTML

>
> >> This macro was written in Word XP, which has now been upgraded to
> >> 2007. The OS has also been updated from WinXP Pro to Vista Pro.

>
> >> When I run the macro in Word only, it runs fine - the file is
> >> generated and saved to the correct folder in the correct format.

>
> >> I want to email the file out, so I am trying to run it from within an
> >> Outlook 2007 macro. (Security settings prevent Word VBA from
> >> accessing OL VBA, or I would do it all from within Word.)

>
> >> The OL macro creates the Word instance just fine and runs the macro
> >> just fine - until it hits the SaveAs. I put a STOP in the Word code
> >> just before the SaveAs to verify this - as soon aas I F8 to the
> >> SaveAs, my error handler tells me that Outlook VBA has the following
> >> error:
> >> -2147417851
> >> Method "Run" of object "Application" failed

>
> >> Any suggestions on getting this macro to run when accessed from OL
> >> VBA?
> >> Ed-


 
Here's the full code in Word. It's all in one module, most variables

declared at the top, and a Sub that calls to a Function.

When I run this just in Word, it goes great, saves and closes the

doc. When I try to call this from the OL macro, it always errors out

at the SaveAs. The doc is there with all the info in it, just not

saved.

Ed

Dim fsoSysObj As FileSystemObject

Dim fdrFolder As Folder

Dim fdrSubFolder As Folder

Dim filFile As file

Dim objShell As Shell

Dim objFolder As Object

Dim objItem As Object

Dim objLink As Object

Dim doc As Document

Dim rng As Range

Dim strFldName As String

Dim myanchor, strLnkText, strLnkPath

Dim ary() As String

Dim cntAry As Integer

Dim x As Integer

'

Function GetFiles(strPath As String, _

Optional blnRecursive As Boolean) As Boolean

' This procedure returns all the files in a directory into

' an array. If called recursively, it also returns

' all files in subfolders.

On Error Resume Next

' Get folder.

Set fdrFolder = fsoSysObj.GetFolder(strPath)

' Skip this folder

If fdrFolder.Name = "~Work" Then GoTo GetFiles_End

strFldName = fdrFolder.Name

If Err <> 0 Then

' Incorrect path.

GetFiles = False

GoTo GetFiles_End

End If

On Error GoTo 0

Set objFolder = objShell.Namespace(strPath)

' Loop through Files collection, adding to array.

For Each filFile In fdrFolder.Files

If filFile.Type = "Internet Shortcut" Then

Set objItem = objFolder.ParseName(filFile.Name)

Set objLink = objItem.GetLink

' Set info in array

cntAry = cntAry + 1

ReDim Preserve ary(3, cntAry) As String

ary(1, cntAry) = strFldName

ary(2, cntAry) = objItem.Name

ary(3, cntAry) = objLink.Target.Path

End If

Next filFile

' If Recursive flag is true, call recursively.

If blnRecursive Then

For Each fdrSubFolder In fdrFolder.SubFolders

GetFiles fdrSubFolder.Path, True

Next fdrSubFolder

End If

' Return True if no error occurred.

GetFiles = True

GetFiles_End:

Exit Function

End Function

Sub GetMyFaves()

' Calls GetFiles function to retrieve Favorites URLs.

If Application.Documents.Count < 1 Then Application.Documents.Add

Set doc = ActiveDocument

cntAry = 0

' Return new FileSystemObject.

Set fsoSysObj = New FileSystemObject

' Shell object provides objects with link properties

Set objShell = CreateObject("Shell.Application")

' Call recursively, return info into array.

If GetFiles("C:\Users\edward.millis\Favorites", True) Then

For x = 1 To cntAry

Set rng = doc.Paragraphs(doc.Paragraphs.Count).Range

If ary(1, x) <> strFldName Then

rng.Text = "\" & ary(1, x) & vbCrLf

Set rng = doc.Paragraphs(doc.Paragraphs.Count).Range

End If

strFldName = ary(1, x)

Set myanchor = rng

strLnkText = ary(2, x)

strLnkPath = ary(3, x)

doc.Hyperlinks.Add Anchor:=myanchor, Address:= _

strLnkPath, SubAddress:="", ScreenTip:="", TextToDisplay:= _

strLnkText

doc.Content.InsertAfter vbCrLf

Next x

End If

Stop

On Error Resume Next

doc.SaveAs FileName:= _

"C:\Users\edward.millis\Documents\MyFaves.htm", _

FileFormat:=wdFormatHTML

doc.Close

If Err.Number <> 0 Then _

MsgBox Err.Number & ": " & Err.Description

On Error GoTo 0

End Sub

On Mar 9, 12:33 pm, "Tony Jollans" <My forename at my surname dot com
wrote:
> The error is in Outlook because .. you don't have any active error trapping,
> and the error bubbles up to the top and is trapped, ultimately, by the top
> level VBA in Outlook. If you add an On Error to your Word macro, it should
> trap the error there.

> That, however, doesn't help with the actual issue - error code -2147417851
> is a rather generic 'server exception' - these can be symptomatic of object
> errors - lost pointers, or implicit instantiation, for example - that can
> happen in Automation. Can you post the full Word code as well?

> > Enjoy,
> Tony
 
Thank you for that, and sorry for the long delay in replying.

I can't see any obvious cause of your problem. I did, however, cut and paste

both your Outlook and Word codes into 2007 and I had to mess about a bit to

get it to work (some of the problems were my environment, but I did need to

add a trailing backslash on the Set objFolder line) and when I finally did I

got your error - but only once. After that I couldn't repeat the error and,

I'm sorry to say, I don't know what may be causing it.

Enjoy,

Tony

www.WordArticles.com

"Ed from AZ" <prof_ofwhat@yahoo.com> wrote in message

news:ce315ea8-7f3f-406a-9bb3-a98465255c6d@w27g2000pre.googlegroups.com...

Here's the full code in Word. It's all in one module, most variables

declared at the top, and a Sub that calls to a Function.

When I run this just in Word, it goes great, saves and closes the

doc. When I try to call this from the OL macro, it always errors out

at the SaveAs. The doc is there with all the info in it, just not

saved.

Ed

Dim fsoSysObj As FileSystemObject

Dim fdrFolder As Folder

Dim fdrSubFolder As Folder

Dim filFile As file

Dim objShell As Shell

Dim objFolder As Object

Dim objItem As Object

Dim objLink As Object

Dim doc As Document

Dim rng As Range

Dim strFldName As String

Dim myanchor, strLnkText, strLnkPath

Dim ary() As String

Dim cntAry As Integer

Dim x As Integer

'

Function GetFiles(strPath As String, _

Optional blnRecursive As Boolean) As Boolean

' This procedure returns all the files in a directory into

' an array. If called recursively, it also returns

' all files in subfolders.

On Error Resume Next

' Get folder.

Set fdrFolder = fsoSysObj.GetFolder(strPath)

' Skip this folder

If fdrFolder.Name = "~Work" Then GoTo GetFiles_End

strFldName = fdrFolder.Name

If Err <> 0 Then

' Incorrect path.

GetFiles = False

GoTo GetFiles_End

End If

On Error GoTo 0

Set objFolder = objShell.Namespace(strPath)

' Loop through Files collection, adding to array.

For Each filFile In fdrFolder.Files

If filFile.Type = "Internet Shortcut" Then

Set objItem = objFolder.ParseName(filFile.Name)

Set objLink = objItem.GetLink

' Set info in array

cntAry = cntAry + 1

ReDim Preserve ary(3, cntAry) As String

ary(1, cntAry) = strFldName

ary(2, cntAry) = objItem.Name

ary(3, cntAry) = objLink.Target.Path

End If

Next filFile

' If Recursive flag is true, call recursively.

If blnRecursive Then

For Each fdrSubFolder In fdrFolder.SubFolders

GetFiles fdrSubFolder.Path, True

Next fdrSubFolder

End If

' Return True if no error occurred.

GetFiles = True

GetFiles_End:

Exit Function

End Function

Sub GetMyFaves()

' Calls GetFiles function to retrieve Favorites URLs.

If Application.Documents.Count < 1 Then Application.Documents.Add

Set doc = ActiveDocument

cntAry = 0

' Return new FileSystemObject.

Set fsoSysObj = New FileSystemObject

' Shell object provides objects with link properties

Set objShell = CreateObject("Shell.Application")

' Call recursively, return info into array.

If GetFiles("C:\Users\edward.millis\Favorites", True) Then

For x = 1 To cntAry

Set rng = doc.Paragraphs(doc.Paragraphs.Count).Range

If ary(1, x) <> strFldName Then

rng.Text = "\" & ary(1, x) & vbCrLf

Set rng = doc.Paragraphs(doc.Paragraphs.Count).Range

End If

strFldName = ary(1, x)

Set myanchor = rng

strLnkText = ary(2, x)

strLnkPath = ary(3, x)

doc.Hyperlinks.Add Anchor:=myanchor, Address:= _

strLnkPath, SubAddress:="", ScreenTip:="", TextToDisplay:= _

strLnkText

doc.Content.InsertAfter vbCrLf

Next x

End If

Stop

On Error Resume Next

doc.SaveAs FileName:= _

"C:\Users\edward.millis\Documents\MyFaves.htm", _

FileFormat:=wdFormatHTML

doc.Close

If Err.Number <> 0 Then _

MsgBox Err.Number & ": " & Err.Description

On Error GoTo 0

End Sub

On Mar 9, 12:33 pm, "Tony Jollans" <My forename at my surname dot com
wrote:
> The error is in Outlook because .. you don't have any active error
> trapping,
> and the error bubbles up to the top and is trapped, ultimately, by the top
> level VBA in Outlook. If you add an On Error to your Word macro, it should
> trap the error there.

> That, however, doesn't help with the actual issue - error code -2147417851
> is a rather generic 'server exception' - these can be symptomatic of
> object
> errors - lost pointers, or implicit instantiation, for example - that can
> happen in Automation. Can you post the full Word code as well?

> > Enjoy,
> Tony
 
Status
Not open for further replies.
Similar threads
Thread starter Title Forum Replies Date
S Outlook Macro to move reply mail based on the key word in the subjectline Outlook VBA and Custom Forms 0
Diane Poremsky Use Word Macro to Apply Formatting to Email Using Outlook 0
Philip Rose Recreating a WORD Editing Macro to use in Outlook VBA Outlook VBA and Custom Forms 4
J VBS Script (macro) for word to open Outlook template. Outlook VBA and Custom Forms 2
W Macro to add a word in Subject Line Using Outlook 1
L Macro to Open a Specific Word Document - Outlook 2007 Using Outlook 17
J Can't run macro Outlook 2007 that was created in Word 2007 Outlook VBA and Custom Forms 1
J Specify Font Name or Face using VBA Macro in Word Outlook VBA and Custom Forms 2
S Outlook 2021 Can you make emails from 3 word domains "safe" by entering top 2 word domain into Safe List in Outlook? Using Outlook 1
O How to find and replace a word in Outlook-Agenda-Subject and Message? Using Outlook 0
V Embedding hyperlink into Word document Using Outlook 2
glnz Can Word Normal.dotm interfere with Outlook? Office 2016 Using Outlook 5
C blocking two or more word domains separated by period/dot Using Outlook 3
P Outlook 2013 Word Share doc as Email Attachment now brings up Eudora. Using Outlook 1
Jennifer Murphy Ctrl+Tab sometimes will not move through text a word at a time Using Outlook 1
N How to remove signature formatting from Text in Word (accidentally taken from Outlook) Using Outlook 0
C replace subject line generated by converting a word document to PDF and sending it to an email Using Outlook 8
iwshim word shortcut to search outlook Using Outlook 3
C Outlook 2016 - converting Word VBA to default Outlook message Outlook VBA and Custom Forms 0
C Merging Word and Access into Outlook Using Outlook 4
Q Why can't I copy image with embedded hyperlink from email to Word Using Outlook 0
Mark Foley Emailing attachment from Word/Excel sends attachment but no message body Using Outlook 0
Diane Poremsky Disable Live Preview in Outlook and Word Using Outlook 0
D Need to extract a line from a word attachment, and add it to the subject line Outlook VBA and Custom Forms 3
M Unable to email from Word or Excel Using Outlook 11
P Macros in Word 2003 - how to transfer to another Word 2003? Using Outlook 1
B Outlook to Word Template error Using Outlook 4
J Outlook body to word document Outlook VBA and Custom Forms 11
A Is it possible to remove the word Categories: from task list views? Using Outlook 2
A Application_ItemSend not accessed when sending email outside outlook (i.e. word or send to mail from Using Outlook 7
O Copy email content and paste into new Word Document using a different font Using Outlook 1
K Import 2013 Outlook Contact Address into Word Using Outlook 36
J "Specific word in body" question Using Outlook 1
D opening Word Document in a business contact? BCM (Business Contact Manager) 3
Z Send mail and contents of body from ms word document Using Outlook 1
O Choosing Sending Email Address from Word Using Outlook 5
C Printing Outlook Form Controls via Word Using Outlook 11
S Highlighter colors limited in Outlook 2007 and Word 2007 Using Outlook 1
O Outlook 2010 does not open MS Word attachments Using Outlook 1
R Using Word/OL 2010 to generate personalized email messages Using Outlook 1
S send email attachment from word, message stripped out Using Outlook 1
M Opening Word Doc's in Adobe Acrobat Pro Using Outlook 9
D Word Wrap Subject Using Outlook 1
C Outlook editing won't select just one word Using Outlook 1
B MS Office 2010: Word email merge not selecting default Outlook account Using Outlook 1
T Word attached files open Word. Excel files open Picture Manager!! Using Outlook 2
C Outlook 2010 some messages received have no word wrap Using Outlook 1
G No word wrap in HTML email. Using Outlook 8
P Word experienced and error trying to open the file Using Outlook 2
T New Inspector word editor crash Outlook 2003 Outlook VBA and Custom Forms 3

Similar threads

Back
Top